8A967C2B9CFB352CDFF2DDA1F8AA42DA

Categories

Wet Abrasion scrub Tester

More Views

Wet Abrasion Scrub Tester TC 110

Be the first to review this product

Availability: In stock

$2,295.00
Test the abrasion of coated surfaces caused by brushing, sponging, washing, etc. This professional Wet Scrub Resistance Tester is engineered in accordance with the test standard ASTM D 2486 to evaluate the scrub resistance of interior wall paint. To perform this Wet Scrub Resistance Test, the paint is applied onto a black plastic panel. After curing the coated plastic panel is placed on the sample area of the Wet Abrasion Scrub Tester and is scrubbed with a nylon bristle brush with a load of 454 grams until failure occurs. The nylon brushes and test loads of 454 grams are
available together with the automated Wet Scrub Resistance Tester to ensure a professional and precise test in accordance with ASTM D 2486.
Comes complete with – Abrasion Tester, 2 Nylon Brushes, 2 ISO special brush, Black panel
All coated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, or other means.
The Wet Abrasion Tester produces a repeatable, controlled condition to simulate everyday use or wear paterns. This abrasion tester will examine washability and related properties that affect the stain resistance of coatings. Detergent performance testing can also be determined in a reproducible manner.
This Wet Abrasion Scrub Tester has been designed for testing the abrasion, washability, brushability and
resistance of a wide range of materials including paint, lacquers, inks, coatings, leather, wood, plastics, printed material, fabrics etc.
It has brand new structure and soap water recycling requirement. It is absolutely necessary for paint manufacturing factory and testing department.

ASTM D 2486
The scrub resistance of interior wall paint is the primary purpose of this method. The paint is applied to a black plastic panel and allowed to cure.
The panel is scrubbed with a nylon bristle brush until failure occurs. An abrasive scrub media is used to accelerate the test.
Base unit supplied with carriage assembly giving applied loading of 454gms, 2 nylon bristle brushes.

ISO 11998 /BS3900
The ISO test method describes a short ver-sion of the scrub abrasion test. This test uses \"3M Scotch Brite 7448\" pads
and the washing liquid is manually applied before starting the test.
The test is finished for evaluation after 200 scrub cycles.
The evaluation of the wash/scrub resis-tance is done by calculating the loss of mass.Base unit supplied with carriage assembly giving applied loading of 135gms and 2 non woven abrasive pads.
Features:
· Twin brush/sponge/pads holders
· Scrub rate 37±1 cycles/minute
· Pre-set counter
· Precise liquid dosing via peristaltic pump
· Quick release sample clamp
· The rapid tool change system allows the user to test the samples in accordance with a wide range of National and International Standards on both flat and curved surfaces simultaneously.
A. Application:
For appraisal of scrub resistance of coating, also appraise any performance of film surface compound treated, such as paint, electroplate, floor board, layer of cover, density of wood, etc. This machine wash the coating coated on the standard sample plate, the times of scrub can be read from counter to appraise the wash performance of coating. This machine form complete set of state standard. It is the necessary examining and determine instrument for manufacture and coating research department
Product Description Tags (0) Reviews (0)

OUR BRANDS

National & International Standards

Wet Abrasion Scrub Tester TC 110

USD

$2,295.00

0

0