Search results for: 'wet abrasion scrub tester tc 110html'

Set Ascending Direction
View as List Grid

82 items

Page
per page
Related search terms
tester leeb 912wtest coat
wet film thickness wheel 329html%22%27
abrasion scrub washability wet abrasion scrub tester tc 2805 2 astm d2486 touch screenhtml
abrasion+scrub+washability+wet+abrasion+scrub+tester+tc+2805+2+astm+d2486+touch+screenhtml
Wet+paint+thickness+gage
  1. Wet Abrasion Scrub Tester TC 2805/2 ASTM D2486 -2 station Tester,
    NEW
    Wet Abrasion Scrub Tester TC 2805/2 ASTM D2486 -2 station Tester,
    Wet Abrasion Scrub Tester is engineered to testing the abrasion, scrub and Washability performance for many kinds of materials; 2 station Tester, C/w 2.0 0.5lb wt. 2 nylon brushes, 2 rubber pads & Brass shim) do the abrasion scrub test in wet and dry condition; touch screen control. It is widely used in water-based coating field. Applicable for paint, coating, leather, wood, plastic, printing materials and fiber etc. Big LCD design, touch- screen operation Operating Menu: English Wet Abrasion Scrub Tester ASTM D2486 - Carriage assembly with pump, applied a load of 454g, 2 Nylon brushers, 2 rubber pads with 325X 12.7X0. 25mm brass shim Application: Paint, coating, leather, wood, plastic, printing materials, and fiber, etc. ◆Big LCD design, touch-screen operation ◆Operating Menu: Chinese or English ◆Testing fluid flow is controlled by peristaltic pump Technical Specification: ◆Scrub rate: 37±1 cycles/min ◆Maximum setting of abrasion times: 9999 ◆Sample thickness: 0-25 mm ◆Test panel thickness range:0-25 mm (Adjustable) Standards: ◆ASTM D2486, D3450 ◆DIN 53778 ◆ISO 11998/BS 3900 Standard: ASTM D2486 Carriage assembly with pump, applied load 454g, 2 Nylon brushers, 2 rubber pads with 325×12.7×0.25mm brass shim Learn More
    $5,125.00
  2. Wet Abrasion Scrub Tester TC 2805/3 – ASTM D 3450, Tester c/w 2-750g weight and 2 sponges
    NEW
    Wet Abrasion Scrub Tester TC 2805/3 – ASTM D 3450, Tester c/w 2-750g weight and 2 sponges
    Wet Abrasion Scrub Tester TC 2805/3 is engineered to testing the abrasion, scrub and Washability performance for many kinds of materials; do the abrasion scrub test in wet and dry condition; touch screen control. It is widely used in water-based coating field. Applicable for paint, coating, leather, wood, plastic, printing materials, and fiber, etc. Big LCD design, touch- screen operation Operating Menu: English Wet Abrasion Scrub Tester TC 2805/3 – ASTM D 3450, Tester c/w 2-750g weight and 2 sponges Standard: ASTM D3450 Carriage assembly with pump, applied weight 1500g, 2 sponges Learn More
    $5,125.00
  3. Wet Abrasion Scrub Tester TC 2805/1 - DIN53778 -2 station Tester, C/w 2- 250g wt. 2 wild boar bristle brushes
    NEW
    Wet Abrasion Scrub Tester TC 2805/1 - DIN53778 -2 station Tester, C/w 2- 250g wt. 2 wild boar bristle brushes
    Wet Abrasion Scrub Tester is engineered to testing the abrasion, scrub and Washability performance for many kinds of materials; do the abrasion scrub test in wet and dry condition; touch screen control. It is widely used in water- based coating field. Applicable for paint, coating, leather, wood, plastic, printing materials and fiber etc. Big LCD design, touch- screen operation Operating Menu: English Wet Abrasion Scrub Tester DIN-53778 - Carriage assembly with pump, 2-250 g weight, 2 wild boar bristle brushes 325X 12.7X0. Standard: DIN 53778 Carriage assembly with pump, applied weight 250g, 2 brushes with natural bristle Learn More
    $5,125.00
  4. Linear Abrasion Tester BEVS 2803-Touch Screen: Rubbing Cycles:0-9999 (Adjustable) Speed:20-99 cycles/min (Adjustable) Rubbing Distance:10-50mm Test Platform:350*400mm
    NEW
    Linear Abrasion Tester BEVS 2803-Touch Screen: Rubbing Cycles:0-9999 (Adjustable) Speed:20-99 cycles/min (Adjustable) Rubbing Distance:10-50mm Test Platform:350*400mm
    The state – of the art Linear Abrasion tester is designed according to the American DuPont standard and applied to the abrasion resistant test for all kinds of non-conductive coating layers. Evaluate the abrasion of samples by using rubber, artificial sweat, steel wool or alcohol to scrub the surface of the samples. Main Features: Big LCD design, touch-screen operation Adjustable speed intelligent system, ensure the accuracy of sample measurement Universal fixture to fix the sample in different shape & size Technical Specification: Humanized screen, touch-screen control Rubbing frequency: No sections and adjustable speed frequency Adjustable rubbing cycle times: 0–9999 Adjustable stroke length: 20-99 times/min Adjustable rubbing distance: 10–50 mm Test platform: 350×400mm (L×W) Prior to testing, it is recommended that specimens/samples be conditioned for at least 24 hrs in the test atmosphere, organic materials should be conditioned for 48 hours, the dry and curing conditions for printing or coating on plastics versus metals can be different and many influence the test results, also heat and moisture are known to affect the physical properties of many materials. It is recommended that all tests be conducted in the standard laboratory atmosphere of 23±2℃ with 50±5% relative humidity Learn More
    $2,995.00
  5. Protective Coatings Inspection Kit 3 Premium Plus Ferrous 200 mils- Blast-cleaned steel to Surface Preparation
    NEW
    Protective Coatings Inspection Kit 3 Premium Plus Ferrous 200 mils- Blast-cleaned steel to Surface Preparation

    Equipment supplied in our Protective Coatings Inspection Kits 3 will enable on-site testing for all seven parameters of blast-cleaned steel and coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287)., Surface cleanliness testing for soluble salts (ISO 8502-6, and ISO 8502-9)., Surface cleanliness assessment for the quantity and size of dust particles (ISO 8502-3). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808).Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840). Wall thickness /Material thickness.

    Download Data Sheet 

    Ultrasonic Wall/ Material Thickness measurement 

    The SA 40 plus “through Coat” is a rugged, easy-to-use, portable precision Ultrasonic Thickness Gauge designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, brass, silver, etc., in the automotive, aerospace, corrosion, and food industries and can be easily equipped with the low & high-frequency probes as well as a high-temperature probe. It is equipped with a four-digit LCD and switchable from normal mode to a multiple echo mode MEC. Measuring range: 0.70 – 300 mm on steel and 3.00 -40.00  mm through the coat (MEC mode) with a coating less than 1.2 mm thickness. This Wall thickness gauge - SA40+ Ultrasonic Gauge comes with a Standard 5MHz probe PT-5, a probe holder, a Built-in calibration block, a Coupling paste for normal temperature, a Test certificate, an Operation manual, and a Carrying Case. Features: Model SA40+ Display 4 digits, LCD Backlight Yes, Measuring range 0.70~300.0mm in steel with PT-5 probe (Normal mode) 3.00~40.00mm in steel (Thickness for coating: <1.2mm (MEC mode), Resolution 0.01mm@0.70~99.99mm, 0.1mm@100.0~300.0mm, Accuracy 0.70~9.99mm ±0.05mm / 10.00~99.99mm ±(0.5%+0.01)mm 100.0~300.0 ±(1%+0.1)mm Unit mm/inch Velocity 1000~9999m/s, Coupling indicator Yes, Calibration Auto Memory 400 data, Low battery indicator Yes, Working environment 0~40oC, 20~90%RH, Power off Auto, Power supply AA battery x 2, Dimension (mm) 127x66x29, Net weight (g) 240, Standard probe PT-5 

     Pictorial Surface Standards 

    These booklets contain high-quality photographs used for comparison purposes to assess the visual appearance of a steel surface. The Inspection Kit 3 includes both the SSPC Standard – VIS 1 and VIS-3. 

     LED Illuminated (x10) Magnifier 

    The Lightweight, battery-powered, portable magnifier, x 10 magnification for close surface inspection is ideal for viewing surface comparators and blast cleaned surfaces. It has scaled lens for easy assessment of surface profiles. 

    Dust Tape Kit 

    The Dust Tape Test employs the Dust Test Tape and Dust Test Charts to assess the quantity and size of dust particles on blast-cleaned steel.y foreign particles such as dust particles on blast-cleaned steel surfaces reduce the adhesion of applied coatings, and when moisture is absorbed promotion of corrosion is very easy to occur on the steel surface.In this kit, all items are supplied in an industrial Carrying Case with Dust Test Tape (60m), Dust Test Charts (pack of 50) and X10 Illuminated Magnifier.The supplied Dust Test Tape Comparator Chart indicates 5 classifications of dust particles and 4 sections of contrasting backgrounds, where the Dust Test Tape can be applied. Relevant information to identify issues on the tested surface is recorded on the Dust Test Tape Chart. 

    Bresle Salt Kit- Patch Test 

    The Bresle Patch Test uses Bresle Patches to measure salts on blast-cleaned steel. Contaminants not removed before painting can result to chemical reactions with blister formation and accumulations of rust that eventually destroy the adhesion between the metal substrate and the applied paint/protective coating. Bresle Test is compliant to ISO 8502-6 and ISO 8502-9. The kit comes with Bresle Patches (pack of 35), Horiba Conductivity Meter, De-ionised Water (500ml), Syringe with Needle, 1413μS/cm Calibration Solution (14ml), Conditioning Solution (14ml) and Beaker.  Conductivity Meter Calibration Certificate with traceability to UKAS is an optional extra. 

     Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.  

    IR Video Thermometer

    The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.  

    Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-effective method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils).  

     Coating Thickness Measurement

    The QNix 9500 Premium plus Coating Thickness Gauge with cable Ferrous probe 200 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. 

     Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian  

     Cross-Hatch Cutter 

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings. 6 blades 2mm spacing- 8 cutters Edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    QNix 9500 PP Digital Coating Thickness Gauge, Fe 200 mils, Ext. Cable- ISO 2808, 19840 Coating Thickness Measurements, QN 9 Software in gauge-body built-in.

    Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4

    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Hexagonal plastic Wet Film Comb (x5)

    Press-O-Film Kit -ISO 8503-5 Surface Profile

    Foil Set (2X)

    Bresle Test Kit- Conductivity Kit ISO 8502-4, 3 Surface cleanliness soluble and dust

    Dust Tape Test Kit - ISO 8502-3

    Pictorial Standards SSPC - VIS 1 & 3 -ASTM D 2200, IMO MSC.215(82), IMO MSC.244(83), ISO 8501-1,

    Ultrasonic Thickness Gauge – through Coat -ASTM E797 (UTM)Thickness measurement-  mandatory component for all commercial vessels and platforms.

    Learn More
    $3,995.00
  6. Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils
    NEW
    Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils

    The Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages:  Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287).  Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Download Data Sheet

    Press-O-Film Testex Profile Kit

     The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

     Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

      Coating Thickness Measurement

     The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian

    Cross-Hatch Cutter

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    .

    QNix 9500 PP Digital Coating Thickness Gauge, Ferrous 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in. 

    InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4 

    Cross-Hatch Cutter -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

     

    Hexagonal Wet Film Comb (x5) 

    Press-O-Film Kit -ISO 8503-5 Surface Profile 

    Foil Set (2X)

     

     

    Learn More
    $2,195.00
  7. Protective Coatings Inspection Kit 2 Premium Plus Dual 50 mils- Paint/ Powder coating on Cathodic protection (zinc galvanizing)
    NEW
    Protective Coatings Inspection Kit 2 Premium Plus Dual 50 mils- Paint/ Powder coating on Cathodic protection (zinc galvanizing)

    The Equipment supplied in our Protective Coatings Inspection Kits 2 will enable on-site testing for five parameters of coating inspection in the following stages:  Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287).  Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool. 

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

     Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

     Coating Thickness Measurement

     The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: 

     Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian

    Cross-Hatch Cutter

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    QNix 9500 PP Digital Coating Thickness Gauge, Dual 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in.

    InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4

    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

     

    Hexagonal Wet Film Comb (x5)

    Press-O-Film Kit -ISO 8503-5 Surface Profile

    Foil Set (2X)

    Learn More
    $2,395.00
  8. Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils
    NEW
    Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils

    Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Download Data Sheet

    Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

     IR Video Thermometer

    The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

      Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

     Coating Thickness Measurement

    The QNix 5500 basic Coating Thickness Gauge with cable Ferrous probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe.

     Cross-Hatch Cutter

     Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    .

     Kit Contents:

    QNix 5500 Basic Integral Digital Coating Thickness Gauge, Fe 50 mils,  Coating Thickness Measurements, with rolling (basic) statistics on display (No Software)
    Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4
    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)
    Hexagonal Wet Film Comb (x5)
    Press-O-Film Kit -ISO 8503-5 Surface Profile
    Foil Set (2X)
    Learn More
    $1,695.00
  9. Protective Coatings Inspection Kit 2 Basic Dual 50 mils

    Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for all seven parameters of blast-cleaned steel and coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287)., Climatic conditions for the estimation of the probability of condensation (ISO 8502-4), Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808), Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840). 

    Download Data Sheet

     Press-O-Film Testex Profile Kit

     

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.  

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity. 

     Hexagonal Wet Film Combs

     These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils).  

    Coating Thickness Measurement

     The QNix 5500 basic Coating Thickness Gauge with cable Ferrous probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. 

     

    Cross-Hatch Cutter

     Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    Qnix 5500 integral Basic Digital Coating Thickness Gauge, dual 50 mils, Coating Thickness Measurements - with rolling (basic) statistics on display (no software) Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO8502-4 , Cross-Hatch Cutter -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils), , Hexagonal Wet Film Comb (x5), Press-O-Film Kit -ISO 8503-5 Surface Profile, Foil Set (2X)

    Learn More
    $1,895.00
  10. Digital Vickers Hardness Tester LHV – 10Z Vickers Hardness Tester - Automatic turret
    The Digital LHV – 10Z Vickers Hardness Tester is a very precise, versatile, user-friendly, large LCD screen, high definition system ideal for hardness testing metallic small parts, thin materials and other metal components (heat-treated metal, a nitride layer, ceramics, alloys, etc.,) in metallography laboratories and production lines. With its unmatched repeatability, it covers the load range of 0.3kg to 10 kg (98N) and conforms to ASTM, ISO, and JJS standards. Back-light brightness is adjustable in 20 levels and Corner length D1 and D2 are readable via an eyepiece. 16.5cm MSH, HD CCD Camera, usb adapter, automatic measuring process, manual software CCD-B, including : USB Cable,software CD for PC and desktop: Windows XP, Windows V Technical Specifications Model LHV – 10Z Minimum Measuring Unit 0.5 microns ( with objective lens) Test Force 0.3kg (2.94N), 0.5kg (4.9N), 1kg (9.8N), 3kg (29.4 N), 5kg (49N), 10kg (98N) Hardness Measuring Range 8-2900 HV Indication of Hardness Value Large LCD screen display Conversion Scale Rockwell, Superficial Rockwell, Birnell Method of testing force applied Automatic (Loading, Dwell, Unloading) Test Microscope Magnification 200X (Measuring), 100X (Observation) Duration Time 0-60s Max Height of Specimen 165mm Distance of Indenter to outer wall 135mm Power Supply 120V/60Hz Net Weight Approximately 45 kg Standard Accessories Objective 10X, 20X (2), Eyepiece 10X, HV Indenter (1), Weight (3), Rod of Weight (1), Hardness Block (2), Testing Table (3), 12V 20W Light Bulb (1), Power Cable (1), 2 A Fuse (2), Screwdriver (2), User manual & Certificate (2) Learn More
    $6,796.00
Set Ascending Direction
View as List Grid

82 items

Page
per page