Search results for: 'surface roughness comparator kt 296ahtml'

Set Ascending Direction
View as List Grid

139 items

Page
per page
Related search terms
Surface Roughness Tester Leeb 432 A
surface preparation digital anvil thickness gage only inch and metrichtml
Surface+Roughness+Tester+Leeb+432+A
surface+preparation+digital+anvil+thickness+gage+only+inch+and+metrichtml
surface preparation dewpoint meter h4001 w humidity and surface temperature probes iso 8502 4html
  1. Leeb 462 Portable Surface Roughness Tester, Standard Drive, 4mN Detector, 20 mm Range
    NEW
    Leeb 462 Portable Surface Roughness Tester, Standard Drive, 4mN Detector, 20 mm Range
    The SFT Leeb462 is a small, lightweight testing device that is not only easy to use via its color LCD Touch screen display with Backlight for improved visibility in darker environment, but it proves to be one of the most reputable surface roughness testing equipment in terms of accuracy. It is equipped with a user friendly system and intuitive navigation of the menu, which can be operated using the screen or keys below the display. SRT Leeb462 has two measurement modes: the General and Split-type modes. It has a multi-directional measuring capacity, including vertical and upside-down, with DSP chip ensuring the achievement of fast testing speed and accuracy. The SFT Leeb462 is powered by a Re-chargeable Lithium battery, which can continuously power the device up-t0 50 hours during onsite applications. For more flexibility, the Drive unit can be separated from the display unit. Surface Roughness Tester Leeb462 measures the roughness of various machined parts, including plane surface, bevel surface, outer cylindrical surface, curved surface, small hole, groove and car axle etc. This exciting and modern Surface roughness tester takes measurements on metal and non-metal parts and workpiece, including a variety of machining parts, machining manufacturing, testing, commodity inspection. SFT Leeb462 is ideal for on-site inspection of large workpiece and production lines. Leeb462 Surface Roughness Tester complies with many industrial standards: JIS, ISO, DIN, ANSI. This Surface Roughness Tester comes complete with the main unit, standard sensor, calibration block, height bracket, Sensor driver, 2 cables for driver, supporting platform, power charger and Warranty card. Technical Specifications: Measuring range Z axis (vertical) ±80μm (0.08mm) / ±160 µm (0.16mm) (optional) X axis (horizontal) 20mm Resolution 0.01μm/±20μm; 0.02μm/±40μm; 0.04μm/±80μm; 0.08μm/±160μm Roughness parameters Ra,Rz,Rq,Rt, Rp,Rv,R3z,R3y,Rz(JIS), Rs, Rsk, Rsm, Rku, Rmr; Ry; Rmax,Rc,RPc,Rk,Rpk,Rvk,Mr1,Mr2 Applicable Standards ISO, PC-RC, Gauss, D-P Graphics Color Curves, Roughness profile, Direct Profile Evaluation length(ln) Ln= lr×n n=1~5 Standard Sensor Measuring principle; Displacement differential inductor (Inductive) Stylus: Stylus Diamond, 90°, 5μm radius of stylus Stylus force <4mN Lead head Cemented carbide, sliding direction radius 40mm Measuring / Sliding speed lr=0.25, Vt=0.135mm/s; lr=0.8, Vt=0. 5mm/s; lr=2. 5, Vt=1mm/s; Return Vt=1mm/s Indication error ≤ ±10% Indication variability ≤ 6% Memory 100 groups ( data and graphic) Power supply 3300mAh Rechargeable Li-ion battery Dimension (mm) Main body:64*53*160 Sensor dirver:23*27*115 Weight APPROX. 380g (Main body) Operation environment Temperature:- 20℃~40℃, Humidity:<90% RH Storage/transportation environment Temperature:- 40℃~60℃, Humidity:<90% RH Learn More
    $1,799.00
  2. Surface Roughness Tester Leeb 410 - Ra:0.05-1 O .Oµm Rz:0.1-50µm
    NEW
    Surface Roughness Tester Leeb 410 - Ra:0.05-1 O .Oµm Rz:0.1-50µm
    Measure the roughness profile with the Leeb 410 - Ra:0.05-1 O .Oµm Rz:0.1-50µm is a high precision portable Surface Roughness Tester with five optional sensors for measuring special-shaped work-pieces. It uses a DSP chip controlled to achieve high accuracy and fast testing speed. Besides its Matrix LCD screen displays all parameters and data, it complies with ISO/ DIN/ CE/ JIS/ FCC standards. It is powered by a 3.7V rechargeable Li-ion battery. Shell: ABS engineering plastic injection, durable, anti-electromagnetic interference. Readings are indicated in Ra and RZ. Ra is the arithmetic mean average of the total values of the roughness profile ordinates, while RZ is the arithmetic mean of the single roughness depths of successive sampling lengths. Roughness parameter Ra, Rz, Rq, Rt Measuring range Ra:0.05-1 O .Oµm Rz:0.1-50µm Resolution 0 .01µm Cut-off lengths 0 .25mm I 0 .8mm I 2 .5mm Evaluation length 1.25mm I 4mm I 5mm Tracing length 6mm Standard ISO, DIN, ANSI, JIS Error of indication ≤±10 % Variation of indication <3% Sensor Piezocrystal Arc Radius & Angle of Sensor Radius of sensor stylus :10.0±2 .5µm Angle :90 ° Force & Change rate Sensor stylus fore: ,,;; o.016N ; change rate: ,,;; soON/ m Stylus force ≤0 .5N Power supply Rechargeable 3 .7V Lithium-Ion battery Operating temperature 0 °C -40 °C Weight 180g Dimension 105x75x24mm Standard configuration: Main Unit, Calibration block, Power charger, optional Supporting platform, manual, certificate, warranty card Learn More
    $1,115.00
  3. Surface Roughness Tester Leeb 432 A - Ra:0.005-16µm	Rz:0.02-160µm
    NEW
    Surface Roughness Tester Leeb 432 A - Ra:0.005-16µm Rz:0.02-160µm
    Our Leeb 432 A - Ra:0.005-16µm Rz:0.02-160µm is a high precision Roughness Tester with five optional sensors for measuring special-shaped work-pieces. It uses a DSP chip controlled to achieve high accuracy and fast testing speed. Besides its Matrix LCD screen displays all parameters and data, it complies with ISO/ DIN/ CE/ JIS/ FCC standards. It is powered by a 3.7V rechargeable Li-ion battery. The Standard Sensor is a diamond stylus with radius 5 µm, force 4mN(0.4gf), and angle 90°. Leeb 432 can be used with an option that is available PC software for data management and Excel reports. An optional printer connected via USB. Leeb 432 Surface Roughness Tester Roughness parameters Ra, Ry, Rq, Rz, Rt, RSm, RS, Rp, Rv, R3z, RSk, Rmax, Rmr Measuring range Ra:0.005-16µm Rz:0.02-160µm Resolution 0 .001 µm Maximum driving trip 17.5mm/0.7inch Sample length/Range (L) 0.25mm, 0 .8mm, 2 .5mm/±20µm ,±40µm,±80µm Evaluation length 1.25mm, 4mm,5mm/Option from(1-5)L Filtering methods RC, PC-RC, GAUSS, D-P, Accuracy ≤±10% Repeatability <6% Memory 100 Groups Operating temperature 0 °C -40 °C Weight 440g Dimensions 119x4?x65mm Standard configuration Main Unit, Standard sensor, Calibration block, Supporting platform, power charger, manual, certificate, Warranty card, PC Software Optional Accessories Measurement Platforms, optional sensors, printer Learn More
    $1,595.00
  4. Surface Roughness Tester Leeb 432 - Ra:0.005-16µm	Rz:0.02-160µm
    NEW
    Surface Roughness Tester Leeb 432 - Ra:0.005-16µm Rz:0.02-160µm
    Our Leeb 432 Ra:0.005-16µm Rz:0.02-160µm, is a high precision Surface Roughness Finisher Tester with five optional sensors for measuring special-shaped work-pieces. It uses a DSP chip controlled to achieve high accuracy and fast testing speed. Besides its Matrix LCD screen displays all parameters and data, it complies with ISO/ DIN/ CE/ JIS/ FCC standards. It is powered by a 3.7V rechargeable Li-ion battery. The Standard Sensor is a diamond stylus with radius 5 µm, force 4mN(0.4gf), and angle 90°. Leeb 432 can be used with an option is available PC software for data management and Excel reports. An optional printer connected via USB. Leeb 432 Surface Roughness Tester Roughness parameters Ra, Ry, Rq, Rz, Rt, RSm, RS, Rp, Rv, R3z, RSk, Rmax, Rmr Measuring range Ra:0.005-16µm Rz:0.02-160µm Resolution 0 .001 µm Maximum driving trip 17.5mm/0.7inch Sample length/Range (L) 0.25mm, 0 .8mm, 2 .5mm/±20µm ,±40µm,±80µm Evaluation length 1.25mm, 4mm,5mm/Option from(1-5)L Filtering methods RC, PC-RC, GAUSS , D-P, Accuracy ≤±8% Repeat ability <6% Memory 100 Groups Operating temperature 0 °C -40 °C Weight 440g Dimensions 119x4?x65mm Standard configuration Main Unit,Standard sensor, Calibration block, Supporting platform, power charger, manual, certificate, Warranty card, PC Software Optional Accessories Measurement Platforms , optional sensors, printer Learn More
    $1,795.00
  5. Protective Coatings Inspection Kit 3 Premium Plus Ferrous 200 mils- Blast-cleaned steel to Surface Preparation
    NEW
    Protective Coatings Inspection Kit 3 Premium Plus Ferrous 200 mils- Blast-cleaned steel to Surface Preparation

    Equipment supplied in our Protective Coatings Inspection Kits 3 will enable on-site testing for all seven parameters of blast-cleaned steel and coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287)., Surface cleanliness testing for soluble salts (ISO 8502-6, and ISO 8502-9)., Surface cleanliness assessment for the quantity and size of dust particles (ISO 8502-3). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808).Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840). Wall thickness /Material thickness.

    Download Data Sheet 

    Ultrasonic Wall/ Material Thickness measurement 

    The SA 40 plus “through Coat” is a rugged, easy-to-use, portable precision Ultrasonic Thickness Gauge designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, brass, silver, etc., in the automotive, aerospace, corrosion, and food industries and can be easily equipped with the low & high-frequency probes as well as a high-temperature probe. It is equipped with a four-digit LCD and switchable from normal mode to a multiple echo mode MEC. Measuring range: 0.70 – 300 mm on steel and 3.00 -40.00  mm through the coat (MEC mode) with a coating less than 1.2 mm thickness. This Wall thickness gauge - SA40+ Ultrasonic Gauge comes with a Standard 5MHz probe PT-5, a probe holder, a Built-in calibration block, a Coupling paste for normal temperature, a Test certificate, an Operation manual, and a Carrying Case. Features: Model SA40+ Display 4 digits, LCD Backlight Yes, Measuring range 0.70~300.0mm in steel with PT-5 probe (Normal mode) 3.00~40.00mm in steel (Thickness for coating: <1.2mm (MEC mode), Resolution 0.01mm@0.70~99.99mm, 0.1mm@100.0~300.0mm, Accuracy 0.70~9.99mm ±0.05mm / 10.00~99.99mm ±(0.5%+0.01)mm 100.0~300.0 ±(1%+0.1)mm Unit mm/inch Velocity 1000~9999m/s, Coupling indicator Yes, Calibration Auto Memory 400 data, Low battery indicator Yes, Working environment 0~40oC, 20~90%RH, Power off Auto, Power supply AA battery x 2, Dimension (mm) 127x66x29, Net weight (g) 240, Standard probe PT-5 

     Pictorial Surface Standards 

    These booklets contain high-quality photographs used for comparison purposes to assess the visual appearance of a steel surface. The Inspection Kit 3 includes both the SSPC Standard – VIS 1 and VIS-3. 

     LED Illuminated (x10) Magnifier 

    The Lightweight, battery-powered, portable magnifier, x 10 magnification for close surface inspection is ideal for viewing surface comparators and blast cleaned surfaces. It has scaled lens for easy assessment of surface profiles. 

    Dust Tape Kit 

    The Dust Tape Test employs the Dust Test Tape and Dust Test Charts to assess the quantity and size of dust particles on blast-cleaned steel.y foreign particles such as dust particles on blast-cleaned steel surfaces reduce the adhesion of applied coatings, and when moisture is absorbed promotion of corrosion is very easy to occur on the steel surface.In this kit, all items are supplied in an industrial Carrying Case with Dust Test Tape (60m), Dust Test Charts (pack of 50) and X10 Illuminated Magnifier.The supplied Dust Test Tape Comparator Chart indicates 5 classifications of dust particles and 4 sections of contrasting backgrounds, where the Dust Test Tape can be applied. Relevant information to identify issues on the tested surface is recorded on the Dust Test Tape Chart. 

    Bresle Salt Kit- Patch Test 

    The Bresle Patch Test uses Bresle Patches to measure salts on blast-cleaned steel. Contaminants not removed before painting can result to chemical reactions with blister formation and accumulations of rust that eventually destroy the adhesion between the metal substrate and the applied paint/protective coating. Bresle Test is compliant to ISO 8502-6 and ISO 8502-9. The kit comes with Bresle Patches (pack of 35), Horiba Conductivity Meter, De-ionised Water (500ml), Syringe with Needle, 1413μS/cm Calibration Solution (14ml), Conditioning Solution (14ml) and Beaker.  Conductivity Meter Calibration Certificate with traceability to UKAS is an optional extra. 

     Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.  

    IR Video Thermometer

    The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.  

    Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-effective method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils).  

     Coating Thickness Measurement

    The QNix 9500 Premium plus Coating Thickness Gauge with cable Ferrous probe 200 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. 

     Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian  

     Cross-Hatch Cutter 

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings. 6 blades 2mm spacing- 8 cutters Edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    QNix 9500 PP Digital Coating Thickness Gauge, Fe 200 mils, Ext. Cable- ISO 2808, 19840 Coating Thickness Measurements, QN 9 Software in gauge-body built-in.

    Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4

    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Hexagonal plastic Wet Film Comb (x5)

    Press-O-Film Kit -ISO 8503-5 Surface Profile

    Foil Set (2X)

    Bresle Test Kit- Conductivity Kit ISO 8502-4, 3 Surface cleanliness soluble and dust

    Dust Tape Test Kit - ISO 8502-3

    Pictorial Standards SSPC - VIS 1 & 3 -ASTM D 2200, IMO MSC.215(82), IMO MSC.244(83), ISO 8501-1,

    Ultrasonic Thickness Gauge – through Coat -ASTM E797 (UTM)Thickness measurement-  mandatory component for all commercial vessels and platforms.

    Learn More
    $3,995.00
  6. Press -O- Film Replica Tape Kit w/ Surface Profile Gauge (mil), 1 coarse & 1 X- Coarse grade tape - 1.5 to 2.5 mil

    Before applying an expensive protective coating, you should clean the metal surface. Cleaned surfaces must meet agreed-upon profiles for acceptable coating effectiveness and service life. But surface profiles for measurement by conventional techniques are frequently inaccessible or impossible to secure. 

     

     

    The Testex replica tape (Press -O- Film Replica Tape Kit) is used in conjunction with an analog or digital spring-loaded micrometer for  acquiring surface profile measurements according to Method C in ASTM D4417. The micrometer thickness gage measures the average maximum peak to valley, surface profile ranges of the profiled testex tape.. Rub replica tape onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. Then, quantify replica using a spring-loaded micrometer that determines   the maximum peak-to-valley depth. Rolls of tape contain 50 pieces each.

    Learn More
    $278.00
  7. Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils
    NEW
    Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils

    The Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages:  Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287).  Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Download Data Sheet

    Press-O-Film Testex Profile Kit

     The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

     Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

      Coating Thickness Measurement

     The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian

    Cross-Hatch Cutter

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    .

    QNix 9500 PP Digital Coating Thickness Gauge, Ferrous 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in. 

    InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4 

    Cross-Hatch Cutter -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

     

    Hexagonal Wet Film Comb (x5) 

    Press-O-Film Kit -ISO 8503-5 Surface Profile 

    Foil Set (2X)

     

     

    Learn More
    $2,195.00
  8. Protective Coatings Inspection Kit 2 Premium Plus Dual 50 mils- Paint/ Powder coating on Cathodic protection (zinc galvanizing)
    NEW
    Protective Coatings Inspection Kit 2 Premium Plus Dual 50 mils- Paint/ Powder coating on Cathodic protection (zinc galvanizing)

    The Equipment supplied in our Protective Coatings Inspection Kits 2 will enable on-site testing for five parameters of coating inspection in the following stages:  Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287).  Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool. 

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

     Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

     Coating Thickness Measurement

     The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: 

     Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian

    Cross-Hatch Cutter

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    QNix 9500 PP Digital Coating Thickness Gauge, Dual 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in.

    InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4

    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

     

    Hexagonal Wet Film Comb (x5)

    Press-O-Film Kit -ISO 8503-5 Surface Profile

    Foil Set (2X)

    Learn More
    $2,395.00
  9. Pencil Hardness Tester BEV 1301/1000grams
    NEW
    Pencil Hardness Tester BEV 1301/1000grams

    There are different methods of determining how hard a certain coating is. These methods are pencil scale and the Mohs scale, both using the symbol “H” with numbers to assign hardness scale. Most consumers get confused as manufacturers often fail to point out the difference between these methods, which leads to inappropriate claims of the hardness of certain coatings. While Pencil Hardness used for ceramics coatings, paint coatings in accordance with standard ASTM D3363, the Mohs scale is mostly for mineral stones such as diamond, quartz, etc. A mineral scale 9 take one of the hardness material diamond) can have a Mohs scale of 6H and a pencil scale of 8H.

     A pencil hardness test is carried out in such a way that progressively the higher grades of hardness are used to firmly press or move on the to be tested coating. (There is a debate as to whether the pencil has to move or just pressed at 45 degrees). It is until the hardness grade pencil does not leave a mark on the surface of the coating that the coating is assigned the hardness of the used grade of pencil. The actual performance of the coating rellies on its hardness. Higher scaled coatings will wear and tear better than lower scaled coatings.

    BEVS 1301 Pencil hardness Tester is used to determine the resistance of coating material or scratch hardness. The BEVS1301/ 1000g Pencil Hardness Tester complies with the requirements of ASTM D3363 and ISO15184 standard, through leaving a superficial trace on the dry coating film with a certain pencil hardness, the surface will be variably damaged by the hardest pencil to evaluate pass/fail or hardness. Recommend to apply on the smooth film surface. Use a variety of different hardness pencils, the angle between pencil and the coated surface is 45°, scratch on the coated surface under a certain of force, the scratch resistance hardness of the coating is the pencil hardness which just scratched the coating. Pencils are moved with a fixed pressure of 1000 grams. The angle between the pencil and the film surface is 45 degrees. Hardness scale of 14 Mitsubishi pencils -6B-5B-4B-3B-2B-B-Hb-F-H-2H-3H-4H-5H-6H . Paint pencil hardness scale

    Learn More
    $315.00
  10. Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils
    NEW
    Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils

    Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Download Data Sheet

    Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

     IR Video Thermometer

    The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

      Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

     Coating Thickness Measurement

    The QNix 5500 basic Coating Thickness Gauge with cable Ferrous probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe.

     Cross-Hatch Cutter

     Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    .

     Kit Contents:

    QNix 5500 Basic Integral Digital Coating Thickness Gauge, Fe 50 mils,  Coating Thickness Measurements, with rolling (basic) statistics on display (No Software)
    Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4
    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)
    Hexagonal Wet Film Comb (x5)
    Press-O-Film Kit -ISO 8503-5 Surface Profile
    Foil Set (2X)
    Learn More
    $1,695.00
Set Ascending Direction
View as List Grid

139 items

Page
per page