Search results for: 'film application deformation adhesion surface profile'

Set Ascending Direction
View as List Grid

209 items

Page
per page
Related search terms
Surface Roughness Tester Leeb 432 A
application of film laboratory mixer drying time paint film applicator bevs 1811 2 automatic film applicator w glass bed astm d8
surface preparation digital anvil thickness gage only inch and metrichtml
surface+preparation+digital+anvil+thickness+gage+only+inch+and+metrichtml
application of film laboratory mixer drying time paint film applicator laboratory mixer tc 2501 2 a with 1 5 liter vessel 404htm
  1. Press -O- Film Replica Tape Kit w/ Surface Profile Gauge (mil), 1 coarse & 1 X- Coarse grade tape - 1.5 to 2.5 mil

    Before applying an expensive protective coating, you should clean the metal surface. Cleaned surfaces must meet agreed-upon profiles for acceptable coating effectiveness and service life. But surface profiles for measurement by conventional techniques are frequently inaccessible or impossible to secure. 

     

     

    The Testex replica tape (Press -O- Film Replica Tape Kit) is used in conjunction with an analog or digital spring-loaded micrometer for  acquiring surface profile measurements according to Method C in ASTM D4417. The micrometer thickness gage measures the average maximum peak to valley, surface profile ranges of the profiled testex tape.. Rub replica tape onto the abrasive blast cleaned surface forming a reverse replica of the peak-valley pattern in the steel. Then, quantify replica using a spring-loaded micrometer that determines   the maximum peak-to-valley depth. Rolls of tape contain 50 pieces each.

    Learn More
    $278.00
  2. Protective Coatings Inspection Kit 3 Premium Plus Ferrous 200 mils- Blast-cleaned steel to Surface Preparation
    NEW
    Protective Coatings Inspection Kit 3 Premium Plus Ferrous 200 mils- Blast-cleaned steel to Surface Preparation

    Equipment supplied in our Protective Coatings Inspection Kits 3 will enable on-site testing for all seven parameters of blast-cleaned steel and coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287)., Surface cleanliness testing for soluble salts (ISO 8502-6, and ISO 8502-9)., Surface cleanliness assessment for the quantity and size of dust particles (ISO 8502-3). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808).Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840). Wall thickness /Material thickness.

    Download Data Sheet 

    Ultrasonic Wall/ Material Thickness measurement 

    The SA 40 plus “through Coat” is a rugged, easy-to-use, portable precision Ultrasonic Thickness Gauge designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, brass, silver, etc., in the automotive, aerospace, corrosion, and food industries and can be easily equipped with the low & high-frequency probes as well as a high-temperature probe. It is equipped with a four-digit LCD and switchable from normal mode to a multiple echo mode MEC. Measuring range: 0.70 – 300 mm on steel and 3.00 -40.00  mm through the coat (MEC mode) with a coating less than 1.2 mm thickness. This Wall thickness gauge - SA40+ Ultrasonic Gauge comes with a Standard 5MHz probe PT-5, a probe holder, a Built-in calibration block, a Coupling paste for normal temperature, a Test certificate, an Operation manual, and a Carrying Case. Features: Model SA40+ Display 4 digits, LCD Backlight Yes, Measuring range 0.70~300.0mm in steel with PT-5 probe (Normal mode) 3.00~40.00mm in steel (Thickness for coating: <1.2mm (MEC mode), Resolution 0.01mm@0.70~99.99mm, 0.1mm@100.0~300.0mm, Accuracy 0.70~9.99mm ±0.05mm / 10.00~99.99mm ±(0.5%+0.01)mm 100.0~300.0 ±(1%+0.1)mm Unit mm/inch Velocity 1000~9999m/s, Coupling indicator Yes, Calibration Auto Memory 400 data, Low battery indicator Yes, Working environment 0~40oC, 20~90%RH, Power off Auto, Power supply AA battery x 2, Dimension (mm) 127x66x29, Net weight (g) 240, Standard probe PT-5 

     Pictorial Surface Standards 

    These booklets contain high-quality photographs used for comparison purposes to assess the visual appearance of a steel surface. The Inspection Kit 3 includes both the SSPC Standard – VIS 1 and VIS-3. 

     LED Illuminated (x10) Magnifier 

    The Lightweight, battery-powered, portable magnifier, x 10 magnification for close surface inspection is ideal for viewing surface comparators and blast cleaned surfaces. It has scaled lens for easy assessment of surface profiles. 

    Dust Tape Kit 

    The Dust Tape Test employs the Dust Test Tape and Dust Test Charts to assess the quantity and size of dust particles on blast-cleaned steel.y foreign particles such as dust particles on blast-cleaned steel surfaces reduce the adhesion of applied coatings, and when moisture is absorbed promotion of corrosion is very easy to occur on the steel surface.In this kit, all items are supplied in an industrial Carrying Case with Dust Test Tape (60m), Dust Test Charts (pack of 50) and X10 Illuminated Magnifier.The supplied Dust Test Tape Comparator Chart indicates 5 classifications of dust particles and 4 sections of contrasting backgrounds, where the Dust Test Tape can be applied. Relevant information to identify issues on the tested surface is recorded on the Dust Test Tape Chart. 

    Bresle Salt Kit- Patch Test 

    The Bresle Patch Test uses Bresle Patches to measure salts on blast-cleaned steel. Contaminants not removed before painting can result to chemical reactions with blister formation and accumulations of rust that eventually destroy the adhesion between the metal substrate and the applied paint/protective coating. Bresle Test is compliant to ISO 8502-6 and ISO 8502-9. The kit comes with Bresle Patches (pack of 35), Horiba Conductivity Meter, De-ionised Water (500ml), Syringe with Needle, 1413μS/cm Calibration Solution (14ml), Conditioning Solution (14ml) and Beaker.  Conductivity Meter Calibration Certificate with traceability to UKAS is an optional extra. 

     Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.  

    IR Video Thermometer

    The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.  

    Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-effective method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils).  

     Coating Thickness Measurement

    The QNix 9500 Premium plus Coating Thickness Gauge with cable Ferrous probe 200 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. 

     Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian  

     Cross-Hatch Cutter 

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings. 6 blades 2mm spacing- 8 cutters Edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    QNix 9500 PP Digital Coating Thickness Gauge, Fe 200 mils, Ext. Cable- ISO 2808, 19840 Coating Thickness Measurements, QN 9 Software in gauge-body built-in.

    Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4

    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Hexagonal plastic Wet Film Comb (x5)

    Press-O-Film Kit -ISO 8503-5 Surface Profile

    Foil Set (2X)

    Bresle Test Kit- Conductivity Kit ISO 8502-4, 3 Surface cleanliness soluble and dust

    Dust Tape Test Kit - ISO 8502-3

    Pictorial Standards SSPC - VIS 1 & 3 -ASTM D 2200, IMO MSC.215(82), IMO MSC.244(83), ISO 8501-1,

    Ultrasonic Thickness Gauge – through Coat -ASTM E797 (UTM)Thickness measurement-  mandatory component for all commercial vessels and platforms.

    Learn More
    $3,995.00
  3. Automatic Pull-Off Adhesion Tester -  20mm Kit Conforms with ASTM D4541
    NEW
    Automatic Pull-Off Adhesion Tester - 20mm Kit Conforms with ASTM D4541

    BEVS 2201 Touch screen Automatic Pull-Off Tester determines the adhesion of single or multi-coat systems of paints, varnishes and other related products. Its high sensitivity ensures a smooth and continuous application of pressure to accurately measure the strength of the bond between coating and substrate. Real-time measure the temperature and humility of product surface, BEVS 2201 can be used on thin metals, wood, concrete and other coatings on Tanks and pipelines. Note: Used the optional BEVS 2201ATV Adhesion Tester Verifier to calibrate the BEVS 2201. Other National and International standards include: GB/T 5201-2006, ISO 4624:2002, ASTM D7234, ISO 4624, ISO 16276-1.

    Technical specifications:

    • Power supply: Built-in rechargeable battery
    • Power adapter: DC 12.6 V
    • Power: 30 W
    • Loading up to 100Mpa
    • Accuracy of put off rate: 2.5%+0.3s
    • Data reproducible measurement enables to set the max. pull off force
    • Enable to set the holding time of tension
    • Data storage and quick view result
    • Real-time display the diagram of drawing rate USB data transmission
    • Multiple dollies are available
    • Data Output via Bluetooth function
    • Pull rate graphs Main Interface:
    • Real-time display curve and parameter.
    • Dolly size/diameter: 10mm, 14mm, 20mm, 50mm
    • Pull rate resolution: 0.5 seconds 1 MPa (145.04 psi)
    • Pressure resolution: 0.01 MPa (1 psi)
    • Pressure accuracy: 0.5 MPa (145.04 psi) or 1% range
    • User definable measuring/ hold force Range:
    • 10mm dolly: 10Mpa – 100MPa/s (1450psi – 14504psi)
    • 14mm dolly: 5Mpa – 50Mpa/s (725psi – 7252psi)
    • 20mm dolly: 2.5MPa – 25MPa/s (362psi – 3626psi)
    • 50mm dolly: 0.4MPa – 4MPa/s (58psi – 580psi)
    • Range of pull-off rate:
    • 10 mm dolly: 0.4-5.6MPa/s, (58-812psi/s)
    • 14 mm dolly: 0.2-2.8MPa/s, (29-403psi/s)
    • 20 mm dolly: 0.1-1.4MPa/s, (15-203psi/s)
    • 50 mm dolly: 0.02-0.22MPa/s, (2-32psi/s)
    • Unit: MPa, psi
    • Dust & water resistant rugged design to exceed IP64
    • Pull rate: adjustable and depend on dolly diameter
    • Dimension (L×W×H): 210×90×140mm
    • Net Weight: 3 kg.

     

    Comes with: Packing list Standard: 20 *20 dolly, 3 Glue mixing tube, 1 2:1Glue gun, 1 Glue, 5 swab, 5 spile, 5 sandpaper, 1 20mm cutter / Optional: 10 50mm dolly, 3 Glue mixing tube, 1 2:1 Glue gun, 1 Glue, 5 swab, 5 spile, 5 sandpaper, 1 50mm cutter.

    Download User Manual for BEVS 2201

    Learn More
    $4,100.00
  4. Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils
    NEW
    Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils

    The Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages:  Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287).  Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Download Data Sheet

    Press-O-Film Testex Profile Kit

     The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

     Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

      Coating Thickness Measurement

     The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian

    Cross-Hatch Cutter

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    .

    QNix 9500 PP Digital Coating Thickness Gauge, Ferrous 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in. 

    InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4 

    Cross-Hatch Cutter -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

     

    Hexagonal Wet Film Comb (x5) 

    Press-O-Film Kit -ISO 8503-5 Surface Profile 

    Foil Set (2X)

     

     

    Learn More
    $2,195.00
  5. Protective Coatings Inspection Kit 2 Premium Plus Dual 50 mils- Paint/ Powder coating on Cathodic protection (zinc galvanizing)
    NEW
    Protective Coatings Inspection Kit 2 Premium Plus Dual 50 mils- Paint/ Powder coating on Cathodic protection (zinc galvanizing)

    The Equipment supplied in our Protective Coatings Inspection Kits 2 will enable on-site testing for five parameters of coating inspection in the following stages:  Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287).  Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool. 

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

     Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

     Coating Thickness Measurement

     The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: 

     Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian

    Cross-Hatch Cutter

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    QNix 9500 PP Digital Coating Thickness Gauge, Dual 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in.

    InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4

    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

     

    Hexagonal Wet Film Comb (x5)

    Press-O-Film Kit -ISO 8503-5 Surface Profile

    Foil Set (2X)

    Learn More
    $2,395.00
  6. Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils
    NEW
    Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils

    Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Download Data Sheet

    Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

     IR Video Thermometer

    The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

      Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

     Coating Thickness Measurement

    The QNix 5500 basic Coating Thickness Gauge with cable Ferrous probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe.

     Cross-Hatch Cutter

     Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    .

     Kit Contents:

    QNix 5500 Basic Integral Digital Coating Thickness Gauge, Fe 50 mils,  Coating Thickness Measurements, with rolling (basic) statistics on display (No Software)
    Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4
    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)
    Hexagonal Wet Film Comb (x5)
    Press-O-Film Kit -ISO 8503-5 Surface Profile
    Foil Set (2X)
    Learn More
    $1,695.00
  7. Protective Coatings Inspection Kit 2 Basic Dual 50 mils

    Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for all seven parameters of blast-cleaned steel and coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287)., Climatic conditions for the estimation of the probability of condensation (ISO 8502-4), Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808), Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840). 

    Download Data Sheet

     Press-O-Film Testex Profile Kit

     

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.  

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity. 

     Hexagonal Wet Film Combs

     These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils).  

    Coating Thickness Measurement

     The QNix 5500 basic Coating Thickness Gauge with cable Ferrous probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. 

     

    Cross-Hatch Cutter

     Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    Qnix 5500 integral Basic Digital Coating Thickness Gauge, dual 50 mils, Coating Thickness Measurements - with rolling (basic) statistics on display (no software) Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO8502-4 , Cross-Hatch Cutter -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils), , Hexagonal Wet Film Comb (x5), Press-O-Film Kit -ISO 8503-5 Surface Profile, Foil Set (2X)

    Learn More
    $1,895.00
  8. BEVS 1830 Film/Paint Applicator Kit - 22 items
    NEW
    BEVS 1830 Film/Paint Applicator Kit - 22 items

    Used to detect the performance of coatings in real time and on-site, BEVS has put together a practical and complete set of film-application instruments in a kit, with exquisite quality and durability. This kit includes 22 items for viscosity, adhesion, fineness detection and film making. It enables the operator to systematically take a multitude of during film application. It is the best portable Film application instruments assembled for film applicators and quality engineers.

    Film Applicator Kit Specification / contents:

    Viscosity Measurement: - Ford Cup, Din Cup, ISO Cup, Afnor Cup, Cup Stand

    Specific Gravity Measurement: -Specific Gravity Cup (Al), Specific Gravity Cup (SS)

    Fineness Measurement: - Double Channel Grind Gauge

    Flow Measurement: - Sagging Applicator, Levelling

    Applicator Permeability Measurement: - Payne Permeability Cup Application of Film Measurement: - Bar Coater(4µm), Bar Coater (100µm), Cube Applicator, Four Sided Applicator, Adjustable Applicator, Four Sided Applicator with Reservoir

    Thickness Measurement: - Wet Film Gauge (SS), Wet Film Gauge (Al), Wet Film Thickness Wheel

    Adhesion Measurement: - Cross Hatch Cutter, Multi-hatch Gauge Packing box dimension: 520×370×155mm Total weight: 10kg

    Learn More
    $3,695.00
  9. Leeb 462 Portable Surface Roughness Tester, Standard Drive, 4mN Detector, 20 mm Range
    NEW
    Leeb 462 Portable Surface Roughness Tester, Standard Drive, 4mN Detector, 20 mm Range
    The SFT Leeb462 is a small, lightweight testing device that is not only easy to use via its color LCD Touch screen display with Backlight for improved visibility in darker environment, but it proves to be one of the most reputable surface roughness testing equipment in terms of accuracy. It is equipped with a user friendly system and intuitive navigation of the menu, which can be operated using the screen or keys below the display. SRT Leeb462 has two measurement modes: the General and Split-type modes. It has a multi-directional measuring capacity, including vertical and upside-down, with DSP chip ensuring the achievement of fast testing speed and accuracy. The SFT Leeb462 is powered by a Re-chargeable Lithium battery, which can continuously power the device up-t0 50 hours during onsite applications. For more flexibility, the Drive unit can be separated from the display unit. Surface Roughness Tester Leeb462 measures the roughness of various machined parts, including plane surface, bevel surface, outer cylindrical surface, curved surface, small hole, groove and car axle etc. This exciting and modern Surface roughness tester takes measurements on metal and non-metal parts and workpiece, including a variety of machining parts, machining manufacturing, testing, commodity inspection. SFT Leeb462 is ideal for on-site inspection of large workpiece and production lines. Leeb462 Surface Roughness Tester complies with many industrial standards: JIS, ISO, DIN, ANSI. This Surface Roughness Tester comes complete with the main unit, standard sensor, calibration block, height bracket, Sensor driver, 2 cables for driver, supporting platform, power charger and Warranty card. Technical Specifications: Measuring range Z axis (vertical) ±80μm (0.08mm) / ±160 µm (0.16mm) (optional) X axis (horizontal) 20mm Resolution 0.01μm/±20μm; 0.02μm/±40μm; 0.04μm/±80μm; 0.08μm/±160μm Roughness parameters Ra,Rz,Rq,Rt, Rp,Rv,R3z,R3y,Rz(JIS), Rs, Rsk, Rsm, Rku, Rmr; Ry; Rmax,Rc,RPc,Rk,Rpk,Rvk,Mr1,Mr2 Applicable Standards ISO, PC-RC, Gauss, D-P Graphics Color Curves, Roughness profile, Direct Profile Evaluation length(ln) Ln= lr×n n=1~5 Standard Sensor Measuring principle; Displacement differential inductor (Inductive) Stylus: Stylus Diamond, 90°, 5μm radius of stylus Stylus force Learn More
    $1,799.00
  10. Qnix 7500 Basic int. w/ Dual probe 200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

    QNix® 7500 Paint Thickness gauge offers mobility, simplest operation, highest measuring accuracy for coating thickness measurement. It can measure up to 200 mils on ferrous and nonferrous metals (aluminum, zinc, copper, brass, stainless steel) and unusual application variety. The small probe allows for better placement on the measuring surface, even on minimum curvatures of 3mm for convex and 30mm for concave.  As a really small and handy gauge, QNix® 7500 can be used either with a directly inserted miniature measuring probe or with a measuring probe alongside an adaptor cable for non-destructive measurements of coating thickness on all Fe- and NFe-substrates. Simply place the probe head on the coated surface and read. Check the accuracy of your QNix 7500 with QNix Coating thickness certified shims / standards. This Thickness gauge combination uses two measuring principles: The Magnetic flux also known as Hall effect principle and the Eddy current principle. It conforms with DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900 - C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091

    QNix 7500 Coating Thickness  w/ 5 mm Advantages:

    • Small, convenient Coating Thickness gauge, DFT QNix® 7500
    • Modular measurement system with a wide range of probes
    • Probes can be inserted or used with an adapter cable
    • The angled probe can be used with an adapter cable
    • Measurements on Fe & NFe substrates
    • Large measurement range of up to 200 mils
    • The QNix® 7500 complies to national and international (DIN, ISO, BS, ASTM) standards and regulations: DIN 50981, 50984 ISO 2178, 2360, 2808 BS 5411 (3 & 11), 3900-C5 ASTM B499, D 7091

    Scope of delivery of the QNix® 7500

    • QNix® 7500 Gauge Body
    • Measuring probe (optional)
    • Adapter cable for external probe (optional)
    • Test certificate for optional measuring probe
    • Fe & NFe reference plates
    • 9 V block battery (alkaline)
    • Extension Cable
    • Operating instructions
    • Robust plastic case for transport and storage
    Learn More
    $1,000.00
Set Ascending Direction
View as List Grid

209 items

Page
per page