Search results for: 'dewpoint meter h4001 w humidity and surface temperature probes iso 8502 4html'

Set Ascending Direction
View as List Grid

261 items

Page
per page
Related search terms
Surface Roughness Tester Leeb 432 A
surface preparation digital anvil thickness gage only inch and metrichtml
Surface+Roughness+Tester+Leeb+432+A
surface+preparation+digital+anvil+thickness+gage+only+inch+and+metrichtml
surface preparation dewpoint meter h4001 w humidity and surface temperature probes iso 8502 4html
  1. Protective Coatings Inspection Kit 3 Premium Plus Ferrous 200 mils- Blast-cleaned steel to Surface Preparation
    NEW
    Protective Coatings Inspection Kit 3 Premium Plus Ferrous 200 mils- Blast-cleaned steel to Surface Preparation

    Equipment supplied in our Protective Coatings Inspection Kits 3 will enable on-site testing for all seven parameters of blast-cleaned steel and coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287)., Surface cleanliness testing for soluble salts (ISO 8502-6, and ISO 8502-9)., Surface cleanliness assessment for the quantity and size of dust particles (ISO 8502-3). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808).Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840). Wall thickness /Material thickness.

    Download Data Sheet 

    Ultrasonic Wall/ Material Thickness measurement 

    The SA 40 plus “through Coat” is a rugged, easy-to-use, portable precision Ultrasonic Thickness Gauge designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, brass, silver, etc., in the automotive, aerospace, corrosion, and food industries and can be easily equipped with the low & high-frequency probes as well as a high-temperature probe. It is equipped with a four-digit LCD and switchable from normal mode to a multiple echo mode MEC. Measuring range: 0.70 – 300 mm on steel and 3.00 -40.00  mm through the coat (MEC mode) with a coating less than 1.2 mm thickness. This Wall thickness gauge - SA40+ Ultrasonic Gauge comes with a Standard 5MHz probe PT-5, a probe holder, a Built-in calibration block, a Coupling paste for normal temperature, a Test certificate, an Operation manual, and a Carrying Case. Features: Model SA40+ Display 4 digits, LCD Backlight Yes, Measuring range 0.70~300.0mm in steel with PT-5 probe (Normal mode) 3.00~40.00mm in steel (Thickness for coating: <1.2mm (MEC mode), Resolution 0.01mm@0.70~99.99mm, 0.1mm@100.0~300.0mm, Accuracy 0.70~9.99mm ±0.05mm / 10.00~99.99mm ±(0.5%+0.01)mm 100.0~300.0 ±(1%+0.1)mm Unit mm/inch Velocity 1000~9999m/s, Coupling indicator Yes, Calibration Auto Memory 400 data, Low battery indicator Yes, Working environment 0~40oC, 20~90%RH, Power off Auto, Power supply AA battery x 2, Dimension (mm) 127x66x29, Net weight (g) 240, Standard probe PT-5 

     Pictorial Surface Standards 

    These booklets contain high-quality photographs used for comparison purposes to assess the visual appearance of a steel surface. The Inspection Kit 3 includes both the SSPC Standard – VIS 1 and VIS-3. 

     LED Illuminated (x10) Magnifier 

    The Lightweight, battery-powered, portable magnifier, x 10 magnification for close surface inspection is ideal for viewing surface comparators and blast cleaned surfaces. It has scaled lens for easy assessment of surface profiles. 

    Dust Tape Kit 

    The Dust Tape Test employs the Dust Test Tape and Dust Test Charts to assess the quantity and size of dust particles on blast-cleaned steel.y foreign particles such as dust particles on blast-cleaned steel surfaces reduce the adhesion of applied coatings, and when moisture is absorbed promotion of corrosion is very easy to occur on the steel surface.In this kit, all items are supplied in an industrial Carrying Case with Dust Test Tape (60m), Dust Test Charts (pack of 50) and X10 Illuminated Magnifier.The supplied Dust Test Tape Comparator Chart indicates 5 classifications of dust particles and 4 sections of contrasting backgrounds, where the Dust Test Tape can be applied. Relevant information to identify issues on the tested surface is recorded on the Dust Test Tape Chart. 

    Bresle Salt Kit- Patch Test 

    The Bresle Patch Test uses Bresle Patches to measure salts on blast-cleaned steel. Contaminants not removed before painting can result to chemical reactions with blister formation and accumulations of rust that eventually destroy the adhesion between the metal substrate and the applied paint/protective coating. Bresle Test is compliant to ISO 8502-6 and ISO 8502-9. The kit comes with Bresle Patches (pack of 35), Horiba Conductivity Meter, De-ionised Water (500ml), Syringe with Needle, 1413μS/cm Calibration Solution (14ml), Conditioning Solution (14ml) and Beaker.  Conductivity Meter Calibration Certificate with traceability to UKAS is an optional extra. 

     Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.  

    IR Video Thermometer

    The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.  

    Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-effective method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils).  

     Coating Thickness Measurement

    The QNix 9500 Premium plus Coating Thickness Gauge with cable Ferrous probe 200 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. 

     Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian  

     Cross-Hatch Cutter 

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings. 6 blades 2mm spacing- 8 cutters Edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    QNix 9500 PP Digital Coating Thickness Gauge, Fe 200 mils, Ext. Cable- ISO 2808, 19840 Coating Thickness Measurements, QN 9 Software in gauge-body built-in.

    Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4

    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Hexagonal plastic Wet Film Comb (x5)

    Press-O-Film Kit -ISO 8503-5 Surface Profile

    Foil Set (2X)

    Bresle Test Kit- Conductivity Kit ISO 8502-4, 3 Surface cleanliness soluble and dust

    Dust Tape Test Kit - ISO 8502-3

    Pictorial Standards SSPC - VIS 1 & 3 -ASTM D 2200, IMO MSC.215(82), IMO MSC.244(83), ISO 8501-1,

    Ultrasonic Thickness Gauge – through Coat -ASTM E797 (UTM)Thickness measurement-  mandatory component for all commercial vessels and platforms.

    Learn More
    $3,995.00
  2. Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils
    NEW
    Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils

    The Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages:  Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287).  Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Download Data Sheet

    Press-O-Film Testex Profile Kit

     The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

     Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

      Coating Thickness Measurement

     The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian

    Cross-Hatch Cutter

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    .

    QNix 9500 PP Digital Coating Thickness Gauge, Ferrous 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in. 

    InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4 

    Cross-Hatch Cutter -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

     

    Hexagonal Wet Film Comb (x5) 

    Press-O-Film Kit -ISO 8503-5 Surface Profile 

    Foil Set (2X)

     

     

    Learn More
    $2,195.00
  3. Protective Coatings Inspection Kit 2 Premium Plus Dual 50 mils- Paint/ Powder coating on Cathodic protection (zinc galvanizing)
    NEW
    Protective Coatings Inspection Kit 2 Premium Plus Dual 50 mils- Paint/ Powder coating on Cathodic protection (zinc galvanizing)

    The Equipment supplied in our Protective Coatings Inspection Kits 2 will enable on-site testing for five parameters of coating inspection in the following stages:  Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287).  Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool. 

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

     Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

     Coating Thickness Measurement

     The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: 

     Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian

    Cross-Hatch Cutter

    Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    QNix 9500 PP Digital Coating Thickness Gauge, Dual 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in.

    InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4

    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

     

    Hexagonal Wet Film Comb (x5)

    Press-O-Film Kit -ISO 8503-5 Surface Profile

    Foil Set (2X)

    Learn More
    $2,395.00
  4. Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils
    NEW
    Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils

    Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

    Download Data Sheet

    Press-O-Film Testex Profile Kit

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

     IR Video Thermometer

    The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

      Hexagonal Wet Film Combs

    These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

     Coating Thickness Measurement

    The QNix 5500 basic Coating Thickness Gauge with cable Ferrous probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe.

     Cross-Hatch Cutter

     Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    .

     Kit Contents:

    QNix 5500 Basic Integral Digital Coating Thickness Gauge, Fe 50 mils,  Coating Thickness Measurements, with rolling (basic) statistics on display (No Software)
    Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4
    Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)
    Hexagonal Wet Film Comb (x5)
    Press-O-Film Kit -ISO 8503-5 Surface Profile
    Foil Set (2X)
    Learn More
    $1,695.00
  5. Protective Coatings Inspection Kit 2 Basic Dual 50 mils

    Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for all seven parameters of blast-cleaned steel and coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287)., Climatic conditions for the estimation of the probability of condensation (ISO 8502-4), Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808), Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840). 

    Download Data Sheet

     Press-O-Film Testex Profile Kit

     

    The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.  

     IR Video Thermometer

     The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity. 

     Hexagonal Wet Film Combs

     These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils).  

    Coating Thickness Measurement

     The QNix 5500 basic Coating Thickness Gauge with cable Ferrous probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. 

     

    Cross-Hatch Cutter

     Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

    Kit Contents:

    Qnix 5500 integral Basic Digital Coating Thickness Gauge, dual 50 mils, Coating Thickness Measurements - with rolling (basic) statistics on display (no software) Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO8502-4 , Cross-Hatch Cutter -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils), , Hexagonal Wet Film Comb (x5), Press-O-Film Kit -ISO 8503-5 Surface Profile, Foil Set (2X)

    Learn More
    $1,895.00
  6. QNix® 4500 Dual 120 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

    Automation Dr. Nix Paint depth Thickness Meter / Gauge - QuaNix/ QNix® 4500 was developed for measuring tasks in the automobile industries. This compact Paint Meter / Gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses, on steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix Paint Thickness Meter / Gauges:

    With the QNix® 4500 Paint Thickness Meter / Gauge, precise measurements on steel, iron, and non-ferrous metals become simply perfect. Change between the measuring procedures is now automatic. No calibration required. With high precision over the entire measuring range: Fe 120 mils and NFe 120 mils. The sensitive measuring paint meter probe of the extremely small, light, and handy QNix® 4500 Paint depth Thickness Meter / Gauge is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation, and serial number.

    The sensitive measuring probe of the extremely small, light, and handy QNix® 4500 Paint Thickness Meter / Gauge is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation, and serial number.

    • Extremely precise: High measuring accuracy over the entire measuring range.
    • Simple operation: No calibration. Only one button. One-hand operation.
    • Innovative technology: Proven Hall sensor and Eddy Current technology. Integrated measuring probe without cables or plugs.
    • Broad-spectrum of use: Dual probe for measurements on steel and non-ferrous metals.
    • Protective measuring: Polished ruby tip to protect both probe and surface to be measured.

    Fe* Measuring of non-ferromagnetic coatings on a ferromagnetic substrate, for example measuring on steel- or iron-substrates. NFe* Measuring of non-ferromagnetic and electrically non-conductive coatings (insulating coatings) on non-ferromagnetic and electrically conductive substrate, for example measuring on aluminum-, zinc-, brass- and certain stainless ( high-grade ) steel-substrates.

    Learn More
    $745.00
  7. QNix® 7500 Basic int. Dual probe 0- 80 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge
    • Our QNix® 7500 Paint thickness Meter is part of the product line of non-destructive measurement gauges by Automation Dr. Nix. Designed for the future, this modular system Paint Thickness gauge is characterized by a wide application range and a robust build, already well known from our other gauges. It is possible for example to use the QNix® 7500 with an integrated probe as a one-hand operated gauge, or by using a connecting cable, as a Paint gauge with an external probe. Using the respective probe, the gauge will measure coatings on steel and iron or coatings on a non-magnetic, metallic substrate such as aluminum. Please read these instructions carefully before operating the gauge for the first time. It will help you to make use of all the advantages and conveniences the QNix® 7500 Paint Thickness meter has to offer and measures on both ferrous metal substrates and non-ferrous metal substrates. Would you like to know more about the other coating thick- ness gauges of our product line? Or do you have any questions concerning coating thickness measuring? Please do not hesitate to contact us. Our specialists with their long- standing experience will be glad to assist you. Measurement of non-ferrous or non-ferromagnetic coatings on ferromagnetic substrate all isolating coatings on non-ferrous metals
    • Small, convenient Coating Thickness gauge QNix® 7500
    • Modular measurement system with a wide range of probes
    • Probes can be inserted or used with an adapter cable
    • Angled probe can be used with an adapter cable
    • Measurements on Fe substrate
    • Large measurement range of up to 80 mils
    • The QNix® 7500 complies to national and international (DIN, ISO, BS, ASTM) standards and regulations: DIN 50981, 50984 ISO 2178, 2360, 2808 BS 5411 (3 & 11), 3900-C5 ASTM B499, D 7091

    Scope of delivery of the QNix® 7500

    • QNix® 7500 Gauge Body
    • Measuring probe (optional)
    • Adapter cable for external probe
    • Test certificate for optional measuring probe
    • Fe & NFe reference plate
    • 9 V block battery (alkaline)
    • Operating instructions
    • Robust plastic case for transport and storage
    Learn More
    $965.00
  8. Qnix 7500 Basic int. w/ Dual probe 200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

    QNix&reg; 7500 Paint Thickness gauge offers mobility, simplest operation, highest measuring accuracy for coating thickness measurement. It can measure up to 200 mils on ferrous and nonferrous metals (aluminum, zinc, copper, brass, stainless steel) and unusual application variety. The small probe allows for better placement on the measuring surface, even on minimum curvatures of 3mm for convex and 30mm for concave.  As a really small and handy gauge, QNix&reg; 7500 can be used either with a directly inserted miniature measuring probe or with a measuring probe alongside an adaptor cable for non-destructive measurements of coating thickness on all Fe- and NFe-substrates. Simply place the probe head on the coated surface and read. Check the accuracy of your QNix 7500 with QNix Coating thickness certified shims / standards. This Thickness gauge combination uses two measuring principles: The Magnetic flux also known as Hall effect principle and the Eddy current principle. It conforms with&nbsp;<span>DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 &amp; 11), BS 3900 - C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091

    QNix 7500 Coating Thickness  w/ 5 mm Advantages:

    • Small, convenient Coating Thickness gauge, DFT QNix® 7500
    • Modular measurement system with a wide range of probes
    • Probes can be inserted or used with an adapter cable
    • The angled probe can be used with an adapter cable
    • Measurements on Fe & NFe substrates
    • Large measurement range of up to 200 mils
    • The QNix® 7500 complies to national and international (DIN, ISO, BS, ASTM) standards and regulations: DIN 50981, 50984 ISO 2178, 2360, 2808 BS 5411 (3 & 11), 3900-C5 ASTM B499, D 7091

    Scope of delivery of the QNix® 7500

    • QNix® 7500 Gauge Body
    • Measuring probe (optional)
    • Adapter cable for external probe (optional)
    • Test certificate for optional measuring probe
    • Fe & NFe reference plates
    • 9 V block battery (alkaline)
    • Extension Cable
    • Operating instructions
    • Robust plastic case for transport and storage
    Learn More
    $1,000.00
  9. QNix® 4200 int. Fe 120 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge
    NEW
    QNix® 4200 int. Fe 120 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

    QNix® 4200 Dry film gauge measures all non-magnetic coatings such as lacquer, enamel, chromium, copper, zinc, etc. on steel or iron. QNix 4200 paint gauge conforms to national (DIN) international (ISO, BS, ASTM) standards: DIN 50981, 50984 BS 5411 (3, 11), 3900 (C, 5) ISO 2178, 2360, 2808 ASTM B 499, D7091.

    Scope of Supply of the QNix® 4200   

      • Handheld gauge with integrated or cable probe
      • Fe reference plate or Fe/NFe reference plate (QNix® 4500)
      • 2 x 1.5 V Mignon batteries (type AA alkaline)
      • Test certificate
      • Operating instructions
      • Robust plastic case for transport and storage
    Learn More
    $615.00
  10. QNix® 4500 int. Fe/NFe probe 200/120 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge
    NEW
    QNix® 4500 int. Fe/NFe probe 200/120 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

    The Paint Gage - QNix® 4500 with integrated single Fe/NFe probe 200/120 mils by Automation Dr. Nix. Developed particularly for thickness measuring tasks in the powder coating industries. This compact Paint Meter / Gauge permits extremely precise thickness measurements of lacquer and corrosion protection thicknesses, on steel and iron. With the practice-oriented product properties, professionals immediately recognize the handwriting of QNix Paint Meter / Gauges:

    With the QNix® 4500 Paint Thickness Meter / Gauge, precise measurements on steel, iron and non-ferrous metals become simply perfect. Change between the measuring procedures is now automatic. No calibration required. With high precision over the entire measuring range: Fe 200 mils and NFe 120 mils. The sensitive measuring paint meter probe of the extremely small, light, and handy QNix® 4500 Thickness Meter / Gauge is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation, and serial number.

    The sensitive measuring probe of the extremely small, light, and handy QNix® 4500 Thickness Gage / Gauge is integrated into the gauge. It is equipped with a readable LCD that informs about readings, battery condition, mode of operation, and serial number.

    • Extremely precise: High measuring accuracy over the entire measuring range.
    • Simple operation: No calibration. Only one button. One-hand operation.
    • Innovative technology: Proven Hall sensor and Eddy Current technology. Integrated measuring probe without cables or plugs.
    • Broad-spectrum of use: Dual probe for measurements on steel and non-ferrous metals.
    • Protective measuring: Polished ruby tip to protect both probe and surface to be measured.
    Learn More
    $850.00
Set Ascending Direction
View as List Grid

261 items

Page
per page