QNix Dry Film Thickness Gauge -DFT, Paint Meter, Paint Thickness Gauge

Dry Film Thickness Gauge QNix 5500

QNix 5500 Dry Film Paint Thickness Gauge - Fastest Measuring speed of ≥ 120 Readings per minute

QNix® 5500 by Automation Dr. Nix is the newly designed Dry Film Paint Thickness Gauge with a running statistic on display for those who do not need to save measurements but instead check for the inconsistency of coating thickness within a defined area or object. QNix® 5500 Dry Film Gauge is available with integrated probes or probe connected to an extension cable to access difficult to reach measurement areas. QNix® 5500 accommodates Fe, NFe, dual probes with measuring range between 50 mils to 120 mils.

Main Features:

• Fibreglass reinforced, 5 piece casing with IP64 dust and splash water protection • Three-layer protection to absorb shocks

• LCD glass providing resistance against scratches and chemicals (Level H6) • Stainless steel probe with dust protection membrane (IP65)

• High measuring trueness over the entire range

• High repeatability of measured results

• Temperature compensation directly in the sensor Gauge body suitable for Fe-, NFe- and dual- probes

• Integrated probe and cable probe available in one device

• Increased readiness for use by the quick change of probes

National & International Standards

Default Category
This category deals with dry film thickness calculation, thickness gage definition, thickness gauge definition, how to measure mil thickness, thickness checking gauge, film thickness, basic film gauge, digital paint thickness gauge, presenting a complete product portfolio of Automation Dr. Nix mil gauge, mil gauge thickness, digital mil thickness gauge, coating thickness mils paint coating thickness gauge, coating thickness testers, paint coat thickness gauge.

National & International Standards

Set Descending Direction
View as List Grid

276 items

Page
per page
  1.  QNix® 9500 B -ext. cable, QN-9 software NFe 200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge
    NEW
    QNix® 9500 B -ext. cable, QN-9 software NFe 200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge
    Automation Dr. Nix QNix® 9500 Basic modular system NFe 200 milsCoating Thickness Gauges is a rugged – IP protection IP64 and electronic digital Paint & Coating thickness gauge designed for fast (more than 120 readings per minute), accurate, reliable and repeatable dry Film thickness measurements on non-ferrous metals ISO/NF. QNix® 9500 is ideal for single-handed operations and uses the principle of Eddy current principle (ISO 2360, ASTM D7091) to measure non-conductive coating thickness on non-ferrous metals substrates. With its ability to interchange probes and statistically (graphic) display, the QNix® 9500 The QNix® 9500 Basic modular system Coating Thickness Gauges is a rugged – IP protection IP64 and electronic digital Paint & Coating thickness gauge designed for fast (more than 120 readings per minute), accurate, reliable and repeatable dry Film thickness measurements on non-ferrous metals ISO/NF. QNix® 9500 Basic modular system is ideal for single-handed operations and uses the principle Eddy current principle (ISO 2360, ASTM D7091) to measure non-conductive coating thickness on non-ferrous metals substrates. With its ability to interchange probes and statistically (graphic) display, the QNix® 9500 Coating Thickness Gauges covers almost all features of a more advanced Paint Thickness Gauge. Available probes for the QNix® 9500 Basic modular system Coating Thickness Gauge, which is either integrated or interchangeable with cable, are built with stainless and enclosed by a protective membrane IP65 for dust resistant (weatherproof). It has a polished ruby tip that is extremely wear-resistant. The QNix® 9500 Basic modular system Coating Thickness Gauges come fully calibrated and is equipped with easily adjustable features for measuring on rough and curved surfaces. Its low center of gravity and extremely large contact surface ensures correct placement, better handling, and precise measuring results. It comes with a Certificate of Calibration traceable to a national metrology institute NIST or PTB. Learn More
    $1,195.00
  2.  SA 40+ “a through Coat” Ultrasonic Thickness Gauge
    NEW
    SA 40+ “a through Coat” Ultrasonic Thickness Gauge
    portable precision Ultrasonic Thickness Gauge designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, brass, silver, etc, in the automotive, aerospace, corrosion, and food industries and can be easily equipped with the low & high-frequency probes as well as a high-temperature probe. It is equipped with a four-digit LCD and switchable from normal mode to a multiple echo mode MEC. Measuring range: 0.70 – 300 mm on steel and 3.00 -40.00 mm through the coat (MEC mode) with coating less than 1.2 mm thickness Learn More
    $845.00
  3. Adjustable Applicator - BEVS 1806B / 50 mm
    NEW
    Adjustable Applicator - BEVS 1806B / 50 mm

    Bevs 1806B /50mm Adjustable Applicator is used to evaluate the film thickness in a wet condition. Precision is ±2 microns. The control of thickness is done by adjusting the two differentiators and scraper. Meaning that the gap is the thickness. It is made up of stainless steel, making is extremely wearing resistance. Measurement is done in 10 microns increments.

    Learn More
    $385.00
  4. Adjustable Applicator BEVS 1806B/100mm
    NEW
    Adjustable Applicator BEVS 1806B/100mm
    The Bevs 1806 B/100mm Adjustable Applicator is used to evaluate the film thickness in a wet condition. The control of thickness is done by adjusting the two differentiators and scraper. Meaning that the gap is the thickness. It is made up of stainless steel, making is extremely wearing resistance. Measurement is done in 10 microns increments. Learn More
    $425.00
  5. Adjustable Applicator BEVS 1806B/200mm

    Bevs 1806 B/200mm Adjustable Applicator is used to evaluate the film thickness in a wet condition. Precision is ±2 microns. The control of thickness is done by adjusting the two differentiators and scraper. Meaning that the gap is the thickness. It is made up of stainless steel, making is extremely wearing resistance. Measurement is done in 10 microns increments.

    Learn More
    $465.00
  6. Automatic Pull-Off Adhesion Tester -  20mm Kit Conforms with ASTM D4541
    NEW
    Automatic Pull-Off Adhesion Tester - 20mm Kit Conforms with ASTM D4541

    BEVS 2201 Touch screen Automatic Pull-Off Tester determines the adhesion of single or multi-coat systems of paints, varnishes and other related products. Its high sensitivity ensures a smooth and continuous application of pressure to accurately measure the strength of the bond between coating and substrate. Real-time measure the temperature and humility of product surface, BEVS 2201 can be used on thin metals, wood, concrete and other coatings on Tanks and pipelines. Note: Used the optional BEVS 2201ATV Adhesion Tester Verifier to calibrate the BEVS 2201. Other National and International standards include: GB/T 5201-2006, ISO 4624:2002, ASTM D7234, ISO 4624, ISO 16276-1.

    Technical specifications:

    • Power supply: Built-in rechargeable battery
    • Power adapter: DC 12.6 V
    • Power: 30 W
    • Loading up to 100Mpa
    • Accuracy of put off rate: 2.5%+0.3s
    • Data reproducible measurement enables to set the max. pull off force
    • Enable to set the holding time of tension
    • Data storage and quick view result
    • Real-time display the diagram of drawing rate USB data transmission
    • Multiple dollies are available
    • Data Output via Bluetooth function
    • Pull rate graphs Main Interface:
    • Real-time display curve and parameter.
    • Dolly size/diameter: 10mm, 14mm, 20mm, 50mm
    • Pull rate resolution: 0.5 seconds 1 MPa (145.04 psi)
    • Pressure resolution: 0.01 MPa (1 psi)
    • Pressure accuracy: 0.5 MPa (145.04 psi) or 1% range
    • User definable measuring/ hold force Range:
    • 10mm dolly: 10Mpa – 100MPa/s (1450psi – 14504psi)
    • 14mm dolly: 5Mpa – 50Mpa/s (725psi – 7252psi)
    • 20mm dolly: 2.5MPa – 25MPa/s (362psi – 3626psi)
    • 50mm dolly: 0.4MPa – 4MPa/s (58psi – 580psi)
    • Range of pull-off rate:
    • 10 mm dolly: 0.4-5.6MPa/s, (58-812psi/s)
    • 14 mm dolly: 0.2-2.8MPa/s, (29-403psi/s)
    • 20 mm dolly: 0.1-1.4MPa/s, (15-203psi/s)
    • 50 mm dolly: 0.02-0.22MPa/s, (2-32psi/s)
    • Unit: MPa, psi
    • Dust & water resistant rugged design to exceed IP64
    • Pull rate: adjustable and depend on dolly diameter
    • Dimension (L×W×H): 210×90×140mm
    • Net Weight: 3 kg.

     

    Comes with: Packing list Standard: 20 *20 dolly, 3 Glue mixing tube, 1 2:1Glue gun, 1 Glue, 5 swab, 5 spile, 5 sandpaper, 1 20mm cutter / Optional: 10 50mm dolly, 3 Glue mixing tube, 1 2:1 Glue gun, 1 Glue, 5 swab, 5 spile, 5 sandpaper, 1 50mm cutter.

    Download User Manual for BEVS 2201

    Learn More
    $4,100.00
  7. Automatic Scratch & Washability Tester BEVS2801 – Touch Screen, with Tungsten Carbide Hemispherical stylus & 2 Kg weight
    NEW
    Automatic Scratch & Washability Tester BEVS2801 – Touch Screen, with Tungsten Carbide Hemispherical stylus & 2 Kg weight

    This advanced Scratch Tester performs scratch resistance evaluation of single coating or complex coating system in insulated color coated sheet. The coating scratch resistance is evaluated by using the tungsten carbide hemispherical stylus with a certain weight or the maximum load of the coating which cannot be scratched. Bevs2801 Scratch Tester conforms with standards of ISO 1518, BS3900. The specific advantage with BEVS 2801 is its ability to display the graph of scratch on the screen in real time and shows the test result on the screen, it will directly display "OK "or "NG ",as well.

    Main Features:

    Big LCD design, touch-screen operation

    Adjustable work platform---More convenient

    Display the test result on the conductive substrate

    High Hardness Scriber---More durable

    Special design for sample clamp---Equipped with ruler

    Show the testing procedure with real time graph

     

    Technical Specification:

    Scratch Speed: 30-40 mm/sec

    Moving Distance: 65 mm

    Power: 220V/50Hz or 110V/60Hz

    Stylus: Tungsten carbide hemispherical stylus, diameter 1mm

    Metallic test panel size: 100×150×0.2mm(L×W×H)

    Standard: ISO 1518, BS3900.

    Learn More
    $3,985.00
  8. Automation Dr. Nix Coating Thickness Gage Model QNix 8500 P/ RF Dual 200/80 mil probe, Software, USB Interface

    Coating Thickness Gage Model QNix 8500 P/ RF Dual 200/80 mil probe, Software, USB Interface. A worldwide new, only thumb-size radio control probe - Quanix Keyless successor, allows safe precision measurements of lacquer and anti-corrosion protection coatings on metal for buildings, restorations and other safety projects - airplanes, ships or bridges. The transfer of data from hardly accessible measuring points per radio control offers a never known freedom of measuring coating thickness. The combination of the precision body gauge QNix® 8500 and the new, only thumb-size dual radio control probe QNix® sat is ideal, as it extends the application scope.

    This miniature wireless probe allows simple safe and accurate one-hand measurements even in difficult positions. To determine exact lacquer and corrosion protection measurements, the small dimensions of this wireless probe make new and crucial areas accessible to measurement where other gauges do not fit. Though, it is such critical spots of coating that are often concealed in difficult-access areas. In addition, the wireless probe facilitates taking measurements, for instance when measuring wide spreading surfaces and taking a vast number of measurements in various measuring spots. 

    Learn More
    $1,795.00
  9. Automation Dr. Nix Coating Thickness Gage QNix 8500 P w/ RF Dual 80/80 mil probe/ Software/USB Interface

    Coating Thickness Gage QNix 8500 P w/ RF Dual 80/80 mil probe/ Software/USB Interface. A worldwide new, only thumb-size radio control probe allows safe precision measurements of lacquer and anti-corrosion protection coatings on metal for buildings, restorations and other safety projects - airplanes, ships or bridges. The transfer of data from hardly accessible measuring points per radio control offers a never known freedom of measuring coating thickness. The combination of the precision body gauge QNix® 8500 and the new, only thumb-size dual radio control probe QNix® sat is ideal, as it extends the application scope.

    This miniature wireless probe allows simple safe and accurate one-hand measurements even in difficult positions. To determine exact lacquer and corrosion protection measurements, the small dimensions of this wireless probe make new and  crucial areas accessible to measurement where other gauges do not fit. Though, it is such critical spots of coating that are often concealed in difficult-access areas. In addition, the wireless probe facilitates taking measurements, for instance when measuring wide-spreading surfaces and taking a vast number of measurements in various measuring spots. 

    Learn More
    $1,745.00
  10. Automation Dr. Nix Coating Thickness Gage QNix 8500 P/ RF Fe 200 mil probe, Software, USB Interface

    Coating Thickness Gage QNix 8500 P/ RF Fe 200 mil probe, Software, USB Interface. The worldwide new, only thumb-size radio control probe allows safe precision measurements of lacquer and anti-corrosion protection coatings on metal for buildings, restorations and other safety projects - airplanes, ships or bridges. The transfer of data from hardly accessible measuring points per radio control offers a never known freedom of measuring coating thickness. The combination of the precision body gauge QNix® 8500 and the new, only thumb-size dual radio control probe QNix® sat is ideal, as it extends the application scope.

    This miniature wireless probe allows simple safe and accurate one-hand measurements even in difficult positions. To determine exact lacquer and corrosion protection measurements, the small dimensions of this wireless probe make new and crucial areas accessible to measurement where other gauges do not fit. Though, it is such critical spots of coating that are often concealed in difficult-access areas. In addition, the wireless probe facilitates taking measurements, for instance when measuring wide spreading surfaces and taking a vast number of measurements in various measuring spots.

     

    Learn More
    $1,795.00
Set Descending Direction
View as List Grid

276 items

Page
per page