Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils
The Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).
Press-O-Film Testex Profile Kit
The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.
IR Video Thermometer
The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of the dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.
Hexagonal Wet Film Combs
These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)
Coating Thickness Measurement
The QNix 9500 Premium plus Coating Thickness Gauge with cable Dual probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld QNix 9500 with built-in PC software QN9, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe. Perform the following tasks with the QNix 9500 Premium plus: Adjustment Zero, 1-point, 2-point, Individual adjustment (freely configurable), Adjustment memory in the device (10 adjustments), Memory: Jobs (100), 10000/spots per area, Total (2,000,000.00), ISO 19840 Zero Offset, ISO 19840 2-point, SSPC PA2 Zero offset, SSPC PA2 2-point to determine if thickness over a large measuring surface area conforms the User-specified/ set min/max limits, PSPC 90/10 – to determine if the coating system complies with the IMO performance standard for protective coatings, AS 3894.3 Swedish - SIS 184160 Australian
Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)
QNix 9500 PP Digital Coating Thickness Gauge, Ferrous 50 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in.
InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4
Cross-Hatch Cutter -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)
Hexagonal Wet Film Comb (x5)
Press-O-Film Kit -ISO 8503-5 Surface Profile
Foil Set (2X)
This Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils kit is designed to enable inspectors to make a proper assessment on a substrate before applying the coating. The inspector will be able to accomplish four major inspection requirements including, Climatic conditions, , adhesion, Surface profile, and Coating thickness / dry film thickness. In other words, comply with SSPC-PA 2, IMO PSPC 90/10 rule, ISO 19840 for dry Film Thickness on steel/iron, Dew point, Air-, Surface temperature, Wet Bulb temperature, Air humidity, Adhesion testing, Surface profile measurement, Conductivity, Dust particles, quantity & size, material thickness –through coatings
- QNix 9500 PP Digital Coating Thickness Gauge, Fe 200 mils, Ext. Cable-Built-in Software -ISO 2808, 19840 Coating Thickness Measurements, Software in gauge-body built-in.
- InfraRed VideoThermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4
- Cross Hatch Cutter - 6 blades 1mm spacing
- Hexagonal Wet Film Comb
- Press-O-Film Kit -ISO 8503-5 Surface Profile
- Foil Set (2X)
|Country of Manufacture||United States|