Protective Coatings Inspection

Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils

Protective Coatings Inspection

Protective Coatings Inspection Kit 2 Basic Dual 50 mils

Protective Coatings Inspection

Protective Coatings Inspection Kit 1 Premium Plus Ferrous 50 mils

Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils

Equipment supplied in our Protective Coatings Inspection Kits 1 will enable on-site testing for five parameters of coating inspection in the following stages: Surface profile measurement of the blasted profile (ISO 8503-5 and NACE SP0287). Climatic conditions for the estimation of the probability of condensation (ISO 8502-4). Wet film measurement to ensure the correct wet film thickness has been applied (ISO 2808). Coating Thickness measurement to ensure the correct coating thickness has been applied (ISO 2808 and ISO 19840).

Download Data Sheet

Press-O-Film Testex Profile Kit

The Testex Replica Tape supplied in rolls of 50 impressions with the Replica Tape Gauge measures the surface profile of blast-cleaned steel in compliant to ISO 8503-5 and NACE SP0287. The Replica Tape Gauge measures the Testex Replica Tape replica and determines the average maximum peak-to-valley height of the blast profile. The Replica Tape Gauge comes with Testex Replica Tapes Coarse and X Coarse ((1.5 & 2.5mils)), and a Burnishing tool.

 IR Video Thermometer

The IR Video Thermometer has multiple functions: Humidity, Wet bulb, Air-temp, and Dew point measurements. It is designed for high performance with Infra-Red Video Thermometers with TFT color LCD display & Camera function. The DT-9860/9861/9862 Series Professional Infrared Video Thermometers has a 2.2” color TFT LCD display & a micro SD memory card for capturing images (JPEG) or video (3GP) and for viewing on PC. It allows for fast, easy and accurate readings for most surface temperature measurements. Also, the measurement of dew point will be very visible for wet and dry proof. Measure IR, Dew point, Air Temperature, Wet Bulb Temperature, Humidity.

  Hexagonal Wet Film Combs

These combs are designed for wet film thickness measurements and come in a range of thickness scales. The plastic combs are a low-cost method for measuring the wet film thickness. 5 combs, each comb has Metric (0 – 80 mils)

 Coating Thickness Measurement

The QNix 5500 basic Coating Thickness Gauge with cable Ferrous probe 50 mils; reliable and accurate coating thickness measurements. This state-of-the-art measuring Dry Film Gauge comes with Handheld, Fe- and NFe-reference plate and two test foils, Certificate of calibration traceable to PTB (only with integrated measuring probe), Operation manual, USB cable, 2 Mignon batteries 1,5 V (AA) alkaline, plastic case for transportation and storage. If a probe is ordered with the modular system, these additional components are supplied: Fe Probe, Test certificate for measuring probe, probe holder, probe adaptor cable for extending the probe.

 Cross-Hatch Cutter

 Use the Cross Hatch Cutter for adhesion testing and assessment of the quality of the bond between protective coating and substrate. This Cross-hatch gauge is ideal for thin, thick or even tough coatings -6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)

.

 Kit Contents:

QNix 5500 Basic Integral Digital Coating Thickness Gauge, Fe 50 mils,  Coating Thickness Measurements, with rolling (basic) statistics on display (No Software)
Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4
Cross-Hatch Cutter - 6 blades 2mm spacing- 8 cutters edges for Coating thickness (2.5 mils - 5 mils)
Hexagonal Wet Film Comb (x5)
Press-O-Film Kit -ISO 8503-5 Surface Profile
Foil Set (2X)
$1,695.00
Availability: In stock
SKU
T1453109-2

Product Description

This basic Protective coatings inspection kit with ferrous 50 mils coating thickness measurement capability is designed to enable inspectors to make proper assessments on a substrate before applying the coating. The inspector will be able to accomplish four major inspection requirements including,  Climatic conditions, , adhesion, Surface profile, and Coating thickness / dry film thickness - rolling statistics on display- no software installation.

Kit Contents:

  • QNix 5500 Basic Integral Digital Coating Thickness Gauge, Fe 50 mils, Coating Thickness Measurements, 
  • Infrared Video Thermometer- Dew Point Meter, Thermometer, Wet Bulb Temp., Air Humidity -measurements.- ISO 8502-4
  • Cross-Hatch Cutter - 6 blades 1mm spacing
  • Hexagonal Wet Film Comb
  • Press-O-Film Kit -ISO 8503-5 Surface Profile
  • Foil Set (2X)
More Information
Country of Manufacture United States
Write Your Own Review
You're reviewing:Protective Coatings Inspection Kit 1 Basic Ferrous 50 mils
Your Rating