Ultrasonic Thickness Measurement

Free shipping for best ultrasonic thickness gauge, ultrasonic wall thickness testing meter, ultrasound thickness measurement, thickness tester price,
Set Descending Direction
View as List Grid

8 Items

per page
  1. MT 660 Multi-Mode Ultrasonic Thickness Gauge-thru Coat, thin pipe wall measurement
    NEW
    MT 660 Multi-Mode Ultrasonic Thickness Gauge-thru Coat, thin pipe wall measurement
    Easy-to-use, portable precision Ultrasonic Thickness Gauge designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, brass, silver, etc, in the automotive, aerospace, corrosion, and food industries and can be easily equipped with the low & high frequency probes as well as a high temperature probes. Measuring range: 0.65 – 600 mm on steel and 2.5 - 100.00 mm through coat. This multi-mode ultrasonic thickness gauge is the newest model upgraded product. It focuses on user experience and functional innovation. Equipped with 320•240 colorful LCD display, it shows clear measurement even under poor lighting conditions and strong sunshine. . The sealed aluninum- magneslum alloy case delicate design is portable designed for defense against oil, dusty environment. Bluetooth communication. • MT660 is Capable of performing thickness measurements on a wide range of materials including metals ( such steel, cast iron, aluminum,copper and so on ) , plastic, ceramics, composites, epoxies, glass and other ultrasonic well-conductive materials. • Sealed metal case delicate design, special designed for defense against bad site environment, MT660 can anti vibration, shock and electromagnetic interference. • With HD colorfulLCD display and intelligent operation interface, it can display the measurement results intuitively and provide a good display experience to user: • With two thickness measurement modes: Pulse- Echo mode and Echo-Echo model,it can measure the thickness through the coating without calculating the coating thickness. • With large storage capacity and lower power design,it can standby super long time above months. • Attach with USB data proceeding software, it can connect with PC for data's analysis,storage and printing. • Capable for compatible with a variety of probes with different frequency and size. • With high accuracy and high resolution display,it can support 0.001 display resolution. • With probe-zero calibration and two point calibration functions,it can correct the system error automatically • Equipped with narrow impulse composite crystal high accuracy probe, it has small dead zone and accurate measurement. • With high brightness EL backlight display, it is convenient for using in dim light environment. • Support communication with Bluetooth printer on site, more conveniently for use. • Auto alarm when exceeding the measuring range. • With auto sleep, auto shutdown and other power saving functions as well as battery rest capacity indicating function. Learn More
    $900.00
  2. MT 600 Multi-Mode - Thru Coat Ultrasonic Thickness Gauge –PE Mode 2.5-600mm), EE mode 2.5-100mm)
    NEW
    MT 600 Multi-Mode - Thru Coat Ultrasonic Thickness Gauge –PE Mode 2.5-600mm), EE mode 2.5-100mm)

    The MT 600 Multi-Mode - Thru Coat, Ultrasonic Thickness Gauge –PE Mode 2.5-600mm), EE mode 2.5-100mm) . portable precision Ultrasonic Thickness Gauge designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, brass, silver, etc, in the petroleum,, aerospace, metallurgy, shipbuilding, corrosion monitoring, and food industries and can be easily equipped with the low & high frequency probes as well as a high temperature probes. Measuring range: 2.5 – 600 mm on steel and 2.5 - 100.00 mm through the coat. It comes with a PSEE probe (5MHZ) for pipe wall measurement (up to 200mm), main unit, Couplant, ABS carrying case, USB cable, Data software. • Capable of performing thickness measurements on a wide range of materials including metals ( such steel, cast iron, aluminum, copper and so on), plastic, ceramics, composites, epoxies, glass, and other ultrasonic well-conductive materials. • Sealed metal case delicate design, specially designed for defense against bad site environment, it can anti-vibration, shock, and electromagnetic interference. • With HD colorful LCD display and intelligent operation interface, it can display the measurement results intuitively and provide a good display experience to user: • With two thickness measurement modes: Pulse-Echo mode and Echo-Echo model, it can measure the thickness through the coating without calculating the coating thickness. • With large storage capacity and lower power design, it can standby super long time above months. • Attach with USB data proceeding software, it can connect with PC for data analysis, storage, and printing. • Capable of compatible with a variety of probes with different frequencies and sizes. • With high accuracy and high-resolution display, it can support 0.001 display resolution. • With probe-zero calibration and two-point calibration functions, it can correct the system error automatically • Equipped with narrow impulse composite crystal high accuracy probe, it has a small dead zone and accurate measurement. • With high brightness EL backlight display, it is convenient for use in a dim light environment. • Support communication with Bluetooth printer on-site, more conveniently for use. • Auto alarm when exceeding the measuring range. • With auto sleep, auto shutdown and other power-saving functions as well as battery rest capacity indicating function.

    It comes with a PSEE probe  (5MHZ) for through coat measurement (up to 100mm in steel), main unit, Couplant, ABS carrying case, USB cable, Data software. Ask for the optional N05  probe (5MHZ) for normal measurement -up to 600mm, HT5 probe (5MHZ) for high temperature lower 300 Degrees Celsius w/ high temp. Couplant or Corse grain probe N02 (2.5MHZ) for thick highly attenuating workpieces.

    Learn More
    $695.00
  3. MT 190 Ultrasonic Wall Thickness Gauge- thru coat, PE 2-600mm, EE 3-60mm in steel
    NEW
    MT 190 Ultrasonic Wall Thickness Gauge- thru coat, PE 2-600mm, EE 3-60mm in steel
    The portable MT190 Ultrasonic Wall thickness gauge provides a cost-effective way to measure wall thickness in the corrosion industry due to its through coat measuring capability. MT190 can also measure on the plastic, ceramic glass. It is employed in industries such as chemical, petroleum, metallurgy, shipbuilding, aviation, and measurements of various machine parts. It comes with two modes in one narrow impulse probe P5EE- PE 2-600mm and EE 3-60mm, main unit, couplant, ABS Carrying Case, User Manual, Warranty Certificate, Certificate, 2 AA alkaline batteries. With the MT190 you are able to measure wall thickness on aluminum, copper, epoxies, glass. Learn More
    $575.00
  4. MT 200 Digital Ultrasonic Wall Thickness Gauge measuring range 0-300mm in Steel, accuracy 0.5% thickness +0.01 mm
    NEW
    MT 200 Digital Ultrasonic Wall Thickness Gauge measuring range 0-300mm in Steel, accuracy 0.5% thickness +0.01 mm
    MT 200 Ultrasonic thickness gauge measures on various materials such as plastic, ceramic, glass, etc,. It finds its application in the petroleum, metallurgy, chemical, shipbuilding, aviation and other industries for monitoring corrosion on pipes and pressure vessels. MT200 has a 4.5 digit LCD with EL backlight and comes with the main unit, transducer N05/90 degrees probe, couplant, instrument case, user manual, 2 alkaline batteries, and a screw driver. The Transducer N05/90 degrees (4MHZ) is used for normal thickness measurement. MT200 is suitable for measuring on steel, cast iron, aluminum, copper, etc,.Zero calibration necessary, two point calibration and automatic modes included, couplant status indicator, EL Backlight. 1.Capable of performing measurements on a wide range of material. 2. Four transducer models. 3. Probe-Zero function, Sound-Velocity-Calibration function. 4.Two-Point Calibration function. 5.Two work modes: Single point mode and Scan mode. 6. Coupling status indicator showing the coupling status. 7. Auto sleep and auto power off function to conserve battery life. 8. Optional software to process the memory data on the PC. 9. Optional thermal mini-printer to print the measured data via RS232 port. Specifications: 1. Display:128×64 dot matrix LCD with EL backlight. 2. Measuring Range:0.75-300mm (in Steel). 3. Sound Velocity Range: 1000~9999 m/s. 4.Resolution:0.1/0.01mm(selectable). 5. Accuracy: +-(0.5%Thickness+0.04)mm 6. Units: Metric/English unit selectable. 7. Four measurements readings per second for single point measurement, and ten per second for Scan Mode. 8. Memory for 20 files (up to 99 values for each file) of stored values. 9. Upper and lower limit can be pre-set. It will alarm automatically when the result value exceeding the limit. 10. Power Supply:Two "AA" size, 1.5 volt alkaline batteries. 100 hours typical operating time (EL backlight off). 11. Communication:RS232 serial port. 12. Case:Extruded aluminum body suitable for use under poor working conditions. Learn More
    $565.00
  5. Ultrasonic Wall Thickness Gauge -thru Coat, Upad X 300 w/ HT400S high Temp probe 5mHz 14mm (Range 0.75-500mm)
    NEW
    Ultrasonic Wall Thickness Gauge -thru Coat, Upad X 300 w/ HT400S high Temp probe 5mHz 14mm (Range 0.75-500mm)
    The Upad X 300 Series Ultrasonic Thickness Gauge is your affordable, best and less expensive choice for accomplishing through Coat ultrasonic thickness measurements. It employs an Ultrasound (ultrasonic pulse-echo/echo) technology. It is ideal for many types of metal, such as steel, cast steel, aluminum, plastic, China glass, glass fiber and any other good conductors of ultrasonic. It includes Online statistics: Max-Min, Standard Deviation Document Statistic: Max-Min Average, mean square error. Accuracy : 0.1/0.01mm or 0.01/0.001 inch resolution. 1000 files could be saved, and each file could save up to 1000 data sets. SPECIFICATIONS: Working principle: Ultrasound (ultrasonic pulse echo / echo echo) Detection range Normal mode : 0.75-400mm Penetrate the coating : 2-25mm (Depending on the probe, the measured material and surface condition) Resolution: 0.1mm(> 100mm)/0.01mm(<100mm) Indicator ±(0.5%H+0.01)mm Velocity : 1000~9999m/s,Preset 5 commonly used material velocity. Calibration: Through the realization of real-time calibration probe zero unique automatic zero calibration technique. V range correction: Auto. Probe connection indication: Yes Coupling condition: Cue signal coupling intensity; measured value displayed solid / hollow change, visual indication of whether the normal measurement. Appearance size: 165×82×30 mm. Weight 250g (Including battery) Work environment Temperature:-20℃~70℃ Humidity:5%~90% The environment without strong vibration, no strong magnetic field, non- corrosive medium and dust particles. Measuring Range: Normal : 0.75~400mm Coating : 2-25mm Excitation pulse 150V Negative spike Receiving system Gain: High / low / automatic Frequency bandwidth: 0.5-15MHz Display LCD dot matrix display High contrast 128X64 Number, Symbol, High Brightness EL, Backlight. Refresh rate measurement: Single point measurement of 5 times per second, 25 times / sec scan mode Measured value / alarm Measured value display: 3 custom measurement display area, can choose online statistics or sound Statistical data Online Statistics: maximum, minimum, standard deviation Document statistics: maximum / small value, mean, variance. Alarm: Acoustic optic alarm threshold Storage Statistic Function Online statistic : Max Min, Standard Devraation Document Statistic : Max Min Average, mean square error Probe Connection/Coupling Indicator OPERATION Accurancy : 0.1/0.01mm or 0.01/0.001 inch Language: Chinese/ English Includes: Device 1 Instructions 1 Probe 1 Packingbox 1 Battery 1 couplant 1 Connection USB is allowed, convenient to read thickness values - Unit mm/inch Power Source Battery 1.5V AAA x 4 probe connection: LEMO 00 (C5) x2 Working time Can work continuously for 200 hours Learn More
    $895.00
  6. Upad X 300 Ultrasonic Wall Thickness Gauge -thru Coat,w/ DA301S probe 5mHz 10mm (Range 0.75-500mm)
    NEW
    Upad X 300 Ultrasonic Wall Thickness Gauge -thru Coat,w/ DA301S probe 5mHz 10mm (Range 0.75-500mm)
    The Upad X 300 Series Ultrasonic Thickness Gauge is your best and less expensive choice for accomplishing through Coat ultrasonic thickness measurements . It employs an Ultrasound (ultrasonic pulse echo / echo echo) technology. It is ideal for many types of metal, such as steel, cast steel, aluminum, plastic ,China glass, glass fiber and any other good conductors of ultrasonic. It includes Online statistic :Max Min, Standard Deviation Document Statistic : Max Min Average, mean square error. Accuracy : 0.1/0.01mm or 0.01/0.001 inch resolution. 1000 files could be saved , and each file could save up to 1000 data sets. SPECIFICATIONS: Working principle: Ultrasound (ultrasonic pulse echo / echo echo) Detection range Normal mode : 0.75-400mm Penetrate the coating : 2-25mm (Depending on the probe, the measured material and surface condition) Resolution: 0.1mm(> 100mm)/0.01mm(<100mm) Indicator ±(0.5%H+0.01)mm Velocity : 1000~9999m/s,Preset 5 commonly used material velocity. Calibration: Through the realization of real-time calibration probe zero unique automatic zerocalibration technique. V range correction: Auto . Probe connection indication: Yes Coupling condition: Cue signal coupling intensity; measured value displayed solid / hollow change, visual indication of whether the normal measurement. Appearance size: 165×82×30 mm. Weight 250g (Including battery) Work environment Temperature:-20℃~70℃ Humidity:5%~90% The environment without strong vibration, no strong magnetic field, non- corrosive medium and dust particles. Measuring Range: Normal : 0.75~400mm Coating : 2-25mm Excitation pulse 150V Negative spike Receiving system Gain: High / low / automatic Frequency bandwidth: 0.5-15MHz Display LCD dot matrix display High contrast 128X64 Number, Symbol, High Brightness EL, Backlight. Refresh rate measurement: Single point measurement of 5 times per second, 25 times / sec scan mode Measured value / alarm Measured value display: 3 custom measurement display area, can choose online statistics or sound Statistical data Online Statistics: maximum, minimum, standard deviation Document statistics: maximum / small value, mean, variance. Alarm: Acoustic optic alarm threshold Storage Statistic Function Online statistic : Max Min, Standard Devraation Document Statistic : Max Min Average, mean square error Probe Connection/Coupling Indicator OPERATION Accurancy : 0.1/0.01mm or 0.01/0.001 inch Language: Chinese/ English Includes: Device 1 Instructions 1 Probe 1 Packingbox 1 Battery 1 couplant 1 Connection USB is allowed, convenient to read thickness values - Unit mm/inch Power Source Battery 1.5V AAA x 4 probe connection: LEMO 00 (C5) x2 Working time Can work continuously for 200 hours Learn More
    $649.00
  7. UTG 960 Ultrasonic Wall Thickness Gauge - Range 0.70-1000 mm -Coating Thickness less 1 mm for thru Coat measurement
    UTG 960 Ultrasonic Wall Thickness Gauge - Range 0.70-1000 mm -Coating Thickness less 1 mm for thru Coat measurement. It includes two methods ways of measuring wall thickness: PE-testing and EE-testing. The EE-test function (Echo to Echo), measures thickness of workpiece through the coating on its surface. It has a large measuring range and a B scan function, showing graphs directly on the display. It includes High-speed of reflection and measuring: The 2 industrial control CPU systems allow independent work of instrument measuring control and the data processing. Measuring sound velocity is according to the known thickness of the object, sound velocity of it can be measured directly. Learn More
    $849.00
  8.  SA 40+ “a through Coat” Ultrasonic Thickness Gauge
    NEW
    SA 40+ “a through Coat” Ultrasonic Thickness Gauge
    portable precision Ultrasonic Thickness Gauge designed to measure the thickness of metallic and nonmetallic materials such as steel, aluminum, brass, silver, etc, in the automotive, aerospace, corrosion, and food industries and can be easily equipped with the low & high-frequency probes as well as a high-temperature probe. It is equipped with a four-digit LCD and switchable from normal mode to a multiple echo mode MEC. Measuring range: 0.70 – 300 mm on steel and 3.00 -40.00 mm through the coat (MEC mode) with coating less than 1.2 mm thickness Learn More
    $845.00
Set Descending Direction
View as List Grid

8 Items

per page