PHB-200 Magnetic Type Digital Brinell Hardness Tester / GB/T231.2,ASTM E10, ISO6506.2

PHB-200 Magnetic Type Digital Brinell Hardness Tester / GB/T231.2,ASTM E10, ISO6506.2

Electric Rockwell Hardness Tester LHR - 150 DT - Max. Specimen Height 17cm, (testing Force 60kgf(588N), 100kgf(980N), 150kgf(1471N))

Electric Rockwell Hardness Tester LHR - 150 DT - Max. Specimen Height 17cm, (testing Force 60kgf(588N), 100kgf(980N), 150kgf(1471N))

PHB-200 Magnetic Type Digital Brinell Hardness Tester / GB/T231.2,ASTM E10, ISO6506.2

The PHB-200 Digital Magnetic Brinell Hardness Tester / GB/T231.2,ASTM E10, ISO6506.2 Alongside the magnetic chucks, fix the PHB-200 Digital Brinell Hardness Tester on the specimen surface and start testing. It works with the Brinell test principle, which complies with standards GB/T231.2, ASTM E10, ISO6506.2. Because of it design, it can be used for quick and precise test of specimens on site. It finds its application where large and heavy steel parts cannot be tested in the laboratory, testing heat treatment parts such as steel plate, pipe, testing the hardness of weld joint on boilers, pressure vessels, and pressure pipes. The PHB-200 tester could replace q low accuracy Leeb portable hardness onsite. Test Force: 187.5kg Test Force Error: ≦±1% Complies with GB/T231.2,ASTM E10, ISO6506.2 Indenter: 2.5mm test ball Testing Range: 100-650HBW Indication Error: Complies with GB/T231.2,ASTM E10, ISO6506.2 Indication Repeatability: Complies with GB/T231.2,ASTM E10, ISO6506.2 Operating Temperature: 5-45℃ Nominal Dimension: Length 245mm × Width 105mm × Height 238mm Weight: 5.1kg Test Piece Surface: Flat: Area ≧195×60mm Thickness ≧5mm Cylinder: Diameter ≧60mm Length ≧200mm Thickness ≧8mm It comes complete with Tester, 120 degree diamond indenter, ball Indenter, Birnell Hardness Block, , iron seat, recharger, Battery box.
$3,425.00
Availability: In stock
SKU
T16000020
PHB-200 Digital Magnetic Brinell Hardness Tester / GB/T231.2,ASTM E10, ISO6506.2 With the magnetic chucks, fix the PHB-200 Digital Brinell Hardness Tester on the specimen surface and start testing. It works with the Brinell test principle, which complies with standards GB/T231.2, ASTM E10, ISO6506.2. Because of it design, it can be used for quick and precise test of specimens on site. It finds its application where large and heavy steel parts cannot be tested in the laboratory, testing heat treatment parts such as steel plate, pipe, testing the hardness of weld joint on boilers, pressure vessels, and pressure pipes. The PHB-200 tester could replace q low accuracy Leeb portable hardness onsite. Test Force: 187.5kg Test Force Error: ≦±1% Complies with GB/T231.2,ASTM E10, ISO6506.2 Indenter: 2.5mm test ball Testing Range: 100-650HBW Indication Error: Complies with GB/T231.2,ASTM E10, ISO6506.2 Indication Repeatability: Complies with GB/T231.2,ASTM E10, ISO6506.2 Operating Temperature: 5-45℃ Nominal Dimension: Length 245mm × Width 105mm × Height 238mm Weight: 5.1kg Test Piece Surface: Flat: Area ≧195×60mm Thickness ≧5mm Cylinder: Diameter ≧60mm Length ≧200mm Thickness ≧8mm It comes complete with Tester, 120-degree diamond indenter, ball Indenter, Birnell Hardness Block, iron seat, recharger, Battery box.
More Information
Country of ManufactureChina
Write Your Own Review
You're reviewing:PHB-200 Magnetic Type Digital Brinell Hardness Tester / GB/T231.2,ASTM E10, ISO6506.2
Your Rating