8A967C2B9CFB352CDFF2DDA1F8AA42DA

PHR-200 Magnetic Type Digital Rockwell Hardness Tester / ISO 6508 and ASTM E18

More Views

PHR-200 Magnetic Type Digital Rockwell Hardness Tester / ISO 6508 and ASTM E18

Be the first to review this product

Availability: In stock

$3,425.00
PHR-200 Digital Magnetic Rockwell Hardness Tester / ISO 6508 and ASTM E18
PHR 200 applies the Rockwell hardness testing principle, with initial test force 10kgf, total test force 60kgf, 100kgf and 150kgf, and two common kinds of indenters: 120° diamond cone indenter. 1.588mm carbide alloy indenter. It has different test force - 3kgf initial test force and total force 15kgf, 30kgf, and 45kgf. Users can choose different Rockwell test force and indenter, depending on different kinds of material, hardness, and thickness. The resolution is 0.1 HR. PHR 200 is used on site to test the hardness of huge heat treatment parts, and the differential geometry of the specimen. It can also be used to measure thin, small, long and irregular parts, standard parts, hardware, and cutters, etc. After taking a measurement, the hardness value can be directly read from the display of them. To take a measurement, Fix the specimen with it's testing side facing the indenter; apply the initial test force; adjust the barrel dial to “0: load major test force and then unload the major test force; read the value on the display.

It comes complete with Tester, Diamond cone Indenter, Carbide ball Indenter, standard Hardness block, iron seat, Adapter.
Initial Test Force: 10kgf
Total Test Force: 60 kgf, 100 kgf, 150 kgf
Testing Range: 20~88HRA, 20~100 HRB, 20~70 HRC
Testing Resolution: 0.1 HR
Indication Error: Comply with ISO 6508 and ASTM E18 standards
Repeatability Error: Comply with ISO 6508 and ASTM E18 standards
Test Force Error: ≤ ± 1%
Operating Temperature: 0 ~50℃
Dimension: Flat :Area ≥ 195mm x 60 mm, Thickness:≥ 5 mm
Cylinder: Diameter ≥ 60 mm Length ≥ 200 mm, Thickness ≥ 8 mm
Product Description Additional Information Tags (0) Reviews (0) Videos

OUR BRANDS

National & International Standards

PHR-200 Magnetic Type Digital Rockwell Hardness Tester / ISO 6508 and ASTM E18

USD

$3,425.00

0