PHBR-200 Magnetic Type Digital Brinell and Rockwell Hardness Tester / of ISO 6506.2/ 6508.2  and ASTM E 10 / 18

PHBR-200 Magnetic Type Digital Brinell and Rockwell Hardness Tester / of ISO 6506.2/ 6508.2 and ASTM E 10 / 18

PHBR-200 Magnetic Type Digital Brinell and Rockwell Hardness Tester / of ISO 6506.2/ 6508.2 and ASTM E 10 / 18

The PHBR-200 Magnetic Digital Brinell and Rockwell Hardness Tester / of ISO 6506.2/ 6508.2 and ASTM E 10 / 18 With a combination of Brinell and Rockwell hardness in one tester, you can now make an accurate Brinell hardness test with the conventional indentation method of ISO 6506.2 and ASTM E 10. You can also make a rapid Brinell hardness test with a depth-measuring method of ASTM E 103, and read hardness value directly. At the same time, it also can do the Rockwell hardness test according to the Rockwell hardness testing method in ISO 6508.2 and ASTM E 18. These functions meet the demand for precise and rapid Brinell hardness testing on-site of large steel and iron parts. It includes a simplified operation of Rockwell hardness and depth-measuring Brinell hardness. You only need to load the total test force, wait a few seconds and then unload the total test force to finish the test. It is very simple and highly accurate. PHBR 200 stores data about the depth curve made from hardness blocks. It can also store several Brinell curves of common materials. The incorporated advanced curve correction methods can be used to test a variety of special materials. Finally, PHBR 200 can check and calibrate the accuracy on-site by precise indentation method. PHBR 200 comes complete with Tester, 120 Diamond Indenter, Ball Indenter, Birnell Hardness Block, Rockwell Hardness block, iron seat, recharger, Battery box. Initial Test Force: 10kgf Total Test Force : 60 kgf, 100 kgf, 150 kgf, 187.5 kgf Testing Range: 20~88HRA, 20~100 HRB, 20~70 HRC, 150~ 400 HBW Testing Resolution: 0.1 HR or 1 HBW Indication Error: Comply with ISO and ASTM standards Repeatability Error: Comply with ISO and ASTM standards Test Force Error: ≤ ± 1%, Comply with ISO and ASTM standards Operating Temperature: 0 ~50℃ Dimension: Flat : Area ≥ 195mm x 60 mm Thickness : ≥ 5 mm Cylinder: Diameter ≥ 60 mm Length ≥ 200 mm, thickness ≥ 8 mm
$5,795.00
Availability: In stock
SKU
T16000022
PHBR-200 Magnetic Digital Brinell and Rockwell Hardness Tester / of ISO 6506.2/ 6508.2 and ASTM E 10 / 18 With this combination of Brinell and Rockwell hardness in one tester, you can now make an accurate Brinell hardness test with the conventional indentation method of ISO 6506.2 and ASTM E 10. You can also make a rapid Brinell hardness test with a depth-measuring method of ASTM E 103, and read hardness value directly. At the same time, it also can do the Rockwell hardness test according to the Rockwell hardness testing method in ISO 6508.2 and ASTM E 18. These functions meet the demand for precise and rapid Brinell hardness testing on-site of large steel and iron parts. It includes a simplified operation of Rockwell hardness and depth-measuring Brinell hardness. You only need to load the total test force, wait a few seconds and then unload the total test force to finish the test. It is very simple and highly accurate. PHBR 200 stores data about the depth curve made from hardness blocks. It can also store several Brinell curves of common materials. The incorporated advanced curve correction methods can be used to test a variety of special materials. Finally, PHBR 200 can check and calibrate the accuracy on-site by precise indentation method. PHBR 200 comes complete with Tester, 120 Diamond Indenter, Ball Indenter, Birnell Hardness Block, Rockwell Hardness block, iron seat, recharger, Battery box. Initial Test Force: 10kgf Total Test Force : 60 kgf, 100 kgf, 150 kgf, 187.5 kgf Testing Range: 20~88HRA, 20~100 HRB, 20~70 HRC, 150~ 400 HBW Testing Resolution: 0.1 HR or 1 HBW Indication Error: Comply with ISO and ASTM standards Repeatability Error: Comply with ISO and ASTM standards Test Force Error: ≤ ± 1%, Comply with ISO and ASTM standards Operating Temperature: 0 ~50℃ Dimension: Flat : Area ≥ 195mm x 60 mm Thickness : ≥ 5 mm Cylinder: Diameter ≥ 60 mm Length ≥ 200 mm, thickness ≥ 8 mm
More Information
Country of ManufactureChina
Write Your Own Review
You're reviewing:PHBR-200 Magnetic Type Digital Brinell and Rockwell Hardness Tester / of ISO 6506.2/ 6508.2 and ASTM E 10 / 18
Your Rating