8A967C2B9CFB352CDFF2DDA1F8AA42DA

Categories

Subscribe to RSS Feed

Certified Test Shim Set

There are different types of Calibration shims - also called Calibration foils. These includes, coated metal plates, polystyrene blocks, plastic shims, zero plates. Calibration shims are used either by manufacturers of Paint Thickness Gauges to calibrate gauges, as part of the manufacturing process or they are used by end users of the finish products to and in calibration laboratories to check accuracy of the gauge for use or re-certification. Using Calibration shims fulfills both inhouse quality control requirements and ISO/QS 9000. The Certified plastic transparent shims with an accuracy of ± 0.01 mil or ±0.3 μm are Automation Dr. Nix most accurate and economic solution. In order to check the accuracy of your QNix Paint Thickness Gauge, place the gauge on the provided zero plate, fe sensor of Fe zero plate and Nfe sensor on Non ferrous zero plate and measure for zero. It is also recommended the customer uses their uncoated substrate. If gauge indicates zero, it is a good starting point. Then, place a certifified cabrated shim with known thickness on the zero plate and measure for that thickness. Accuracy of the gauge is confirmed, if reading of the gauge matches thickness of the shim. Replace shims when they are visibly worn or they have scratches of the surface. Automation Dr. Certified shims can be used to verify the accuracy of competitors Paint thickness gauges.Unfortunately, Automation Dr. Nix certified shims are consumer products and will not be re-calibrated

Automation Dr. Nix Paint / Coating thickness gauges for non-destructive measurement – QNix® series. Facts about QNix coating thickness Gauges - Paint QNix® gauges If you have been doing one and the same thing and improving by learning for over 6 decades, you can call youself a an expert. Desiging and manufacturing coating thickness gauge is the core competence of Automation Dr. Nix. A type II (2) or electronic Paint / coating thickness gauge (also called dry film thickness gauges, paint meter or paint thickness meter) measures the dry film thickness (DFT) on metal substrates non-destructively. QNix paint / Coating thickness Gauges operate on the electromagnetic induction principle, Hall sensor principle and the Eddy current principle. Derived from these principles, sensors are designed for a variety of industrial applications. The two Fe measuring principles allow for coating thickness measurement of dry coating, powder coatings, anodizing and electroplating on metal substrates such as steel, iron, aluminium, zinc or copper. A non-destructive QNix® coating thickness gauge measures the Paint / coating thickness on metal substrates. The substrate must either be magnetic or electrically conductive. The NFe measuring principle allows for coating thickness measurement of electrically insulated coating thickness on electrically conductive substrates; Automation Dr. Nix offers a broad range of dry film thickness for precise and non-destructive measurement in a many industries, including automotive manufacturing, automotive aftersales, corrosion protection, powder coating, car body shops, product finishing, metrorology, laboratory, etc,. The many years of working with experts in heavy-duty corrosion protection, gas, industrial painting and contract coating, surface finishing and bodywork, makes Automation Dr. Nix a reliable partner in these industries. QNix coating thickness gauges are one of the most reliable, easy to use, durable and are proven to pass the Repeatability & Reproducibility (R & R) test. All QNix coating/ Paint thickness gauges conform to to national and international standards such as: DIN EN ISO 2808 DIN EN ISO 2178 - Magnetic induction with electromagnet and measurement with secondary coil (magnetic induction measurement method), Magnetic induction with electromagnet and measurement with Hall sensor, Magnetic induction with permanent magnet and measurement with Hall sensor DIN EN ISO 2360 - Eddy current method DIN 50981 BS 5411 (11)

Grid  List 

Grid  List 

OUR BRANDS

National & International Standards

QuaNix QNix costs less at Testcoat-usa.com