BEVS 1815 Drying Time Recorder ASTM D5895
BEVS 1815 is a touch screen and fully digitally controlled tester. It conforms to improvements in devices for measuring the drying time of surface coating materials and defining the different stages in the drying process and behavior of a variety of paints and coatings. With its excellent reproducibility, it accurately evaluates drying time in all stages. Its ergonomic design, touch screen control, customized user-defined start time and test time offer easy operation. The operator can set the test time between 1 to 48 hours based upon requirements. The holder is used to simply apply the paint to the glass strip to achieve film combined with a cube applicator. It is made by high-grade stainless steel to place the glass strip to allow the operator to hold the strip in position, cube applicator is positioned on the glass strip and fill paint into applicator depending on the demand and then applicator is drawn to the end of the glass strip. incl. Cube Applicator, Glass strip- Holder 10 Tracks, 6, 12, 24, 48 hr., w/ 5 sets of two
Dimension: 550×530×200 mm
Number of tracks：10
Length of strips: 300 mm
Driver：5 sets of motors, 2 track / motor
Drying Time: -Standard track: 6,12,24,48 hours; -Customized track (track 1):
Except for the standard time, the operator can customize the start and test time.
Function reset during the testing: During the test,operator can change the test time and re-start again.
|Country of Manufacture||China|