BEVS 1703 Non-Contact Powder Coating Thickness Gauge -uncured and cured thickness measurement
BEVS 1703 Powder Coating Thickness Gauge is a robust, non-contact production device using photo-thermal technology to measure film thickness non-contact, non-destructive in pre-cured and cured status. It is in compliance with DIN EN 15042-2 standard. It measures fast and precise coating thickness of pre-cured and cured powder on metallic substrates. It is very versatile, measuring the thickness on flat, round surfaces, as well as on angles and edges. Standards DIN EN 15042-2 - It explains the thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: of the DIN EN 15042 is a Guide to the thickness measurement of coatings by photothermic method; the German version is EN 15042-2:2006.
|Measuring Range||0-350 microns|
|Measuring Distance||Approx. 30mm|
|Measuring Speed||512 - 2048 m/s|
|Port||mini USB, Wifi|
|Battery type||3.7V (2500mAh), Rechargeable Lithium Battery|
BEVS 1703 is particularly used to measure powder coating thickness on the paint line. Use this versatile device to measure film thickness on frames, edges, and corners. Measure film thickness parts on a slowly moving powder coating line and swinging powder coated parts. Measure Method: Photo-thermal non-contact Testing Angle: 75°-105° Testing Distance 35mm Testing Time： 1-3Secs Precision： 2μm Testing Requirement： Flat surface, Curve, Edge, and Angle It is easy to achieve rapid measurement in the assembly line and it can be widely used in laboratory and workshop for the real-time detection and control. Flexible operation: the sample or gauge can be moveable during measurement.
Scope of Supply
BEVS 1703 Coating Thickness gauge for analyzing powder film thickness comes complete with
• Photothermal coating thickness sensor
• A display unit for displaying film thickness readings
• Batteries • Charger • User manual
|Country of Manufacture||China|