QNix Qnix 1200 Coating thickness mil gauge

QNix 1200 - 80 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

<img src="/>

QNix® 1500 B w/ int. Dual 0-200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

QNix 1200 - 80 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

With Corrosion expert knowledge you always use QuaNix/QNix®1200 Powder coating dry film thickness gauge by Automation Dr. Nix. As a classical among the coating thickness gauges/ meters, its absence cannot be imagined in the corrosion and metal finishing industries. As patented electronic Paint Thickness Gauge/ Meter with an integrated probe for steel and iron, the /QNix 1200 with a clear readable duplex LCD offers an unusually extensive spectrum of use and a large measuring range, up to 120 mils. The flat design of this gauge allows for measurements at difficult-to-access points. The simple and flexible use, even at wide-stretching surfaces is appreciated by automobile appraisals around the globe. Automobile manufacturers and auto body shops trust in this gauge. The principle of simple, easy handling and precise measurement has made the combination paint depth gauge QNix 1200 to a reliable partner of the automotive market segment. Not only reliable in the automotive market but also in corrosion protection. It is a reliable coating thickness gauge that sets standards. Measures non-magnetic coatings on steel and iron. Easy. Precise. Problem-free and reliable: No calibration, no probe change. The wide measuring range makes the QuaNix/QNix® 1200 a small universal genius often used in Germany and other European countries as an automotive paint meter

Download Instruction Manual

Scope of Supply

 

qn1200

  • QNix® 1200 Paint Coating Thickness Mil Gauge
  • Fe reference plate
  • 9V mono-bloc battery
  • Test certificate
  • Operating instructions
  • The plastic case (ensures comfortable transportation and safe storage)

 

 

$615.00
Availability: In stock
SKU
T1453002

Measuring paint thickness is easy. As an expert, you always use QuaNix/QNix®1200 Paint Thickness Gauge, Paint depth Thickness Gauge, paint depth meter by Quanix, Qnix- Automation Dr. Nix. As a classical among the coating thickness gauges, its absence cannot be imagined in the corrosion and metal finishing industries. As patented electronic paint Thickness Gauge with an integrated probe for steel and iron, the QNix 1200 with a clear readable duplex LCD offers an unusually extensive spectrum of use and a large measuring range, up to 120 mils. The flat design of this gauge allows for measurements at difficult-to-access points. The simple and flexible use, even at wide-stretching surfaces is appreciated by automobile appraisals around the globe. Automobile manufacturers and auto body shops trust in this gauge. The principle of simple, easy handling and precise thickness measurement has made the paint coating thickness gauge meter - paint thickness gauge tester QNix 1200 to a reliable partner of the corrosion inspection industry. It is a reliable paint coating thickness gauge that sets standards. Measures non-magnetic coatings on steel and iron. Easy. Precise. Problem-free and reliable: No calibration, no probe change. The wide measuring range makes the QNix® 1200 a small universal genius. Measuring non-destructively on many metals. 

It has a large measuring range up to 120 mils, an Integrated Fe probe with a non-wearing ruby tip for long-term use with the highest precision over the entire measuring range. The QNix 1200 digital coating thickness gauge/paint thickness tester is ideal for -stretching surfaces. Simply measure at difficult-to-reach places. High reliability and precision even under tough operating conditions. Automatic ON/OFF switch. No switching between the measuring range required. Comfortable one-hand operation. Storage of last reading. Readable duplex LCD display. V-groove for safe measurements on axles and rods. 9-Volt-Block battery for many thousands of measurements.

Fe* Measuring of non-ferromagnetic coatings on a ferromagnetic substrate, for example measuring on steel- or iron-substrates. NFe* Measuring of non-ferromagnetic and electrically non-conductive coatings (insulating coatings) on a non-ferromagnetic and electrically conductive substrate, for example measuring on aluminum-, zinc-, brass- and certain stainless ( high-grade ) steel-substrates.

More Information
Country of ManufactureGermany
Write Your Own Review
You're reviewing:QNix 1200 - 80 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge
Your Rating