Paint Thickness Gauge Model 7500 Basic w/ Dual probe 200 mils

Qnix 7500 Basic int. w/ Dual probe 200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

Paint Thickness Mete QNix® 7500 Basic w/ NFe probe 200 mils

QNix® 7500 Basic int. w/ NFe 200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

Coating Thickness Gauge Model QNix 7500 Basic w/ Fe probe 0- 200 mils and Extension Cable

QNix 7500 Basic w/ Fe probe 0- 200 mils Ext. Cable Paint Thickness Gauge | Paint Meter | Dry Film Gauge

Qnix 7500 Basic int. w/ Dual probe 200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge

QNix&reg; 7500 Paint Thickness gauge offers mobility, simplest operation, highest measuring accuracy for coating thickness measurement. It can measure up to 200 mils on ferrous and nonferrous metals (aluminum, zinc, copper, brass, stainless steel) and unusual application variety. The small probe allows for better placement on the measuring surface, even on minimum curvatures of 3mm for convex and 30mm for concave.  As a really small and handy gauge, QNix&reg; 7500 can be used either with a directly inserted miniature measuring probe or with a measuring probe alongside an adaptor cable for non-destructive measurements of coating thickness on all Fe- and NFe-substrates. Simply place the probe head on the coated surface and read. Check the accuracy of your QNix 7500 with QNix Coating thickness certified shims / standards. This Thickness gauge combination uses two measuring principles: The Magnetic flux also known as Hall effect principle and the Eddy current principle. It conforms with&nbsp;<span>DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 &amp; 11), BS 3900 - C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091

QNix 7500 Coating Thickness  w/ 5 mm Advantages:

  • Small, convenient Coating Thickness gauge, DFT QNix® 7500
  • Modular measurement system with a wide range of probes
  • Probes can be inserted or used with an adapter cable
  • The angled probe can be used with an adapter cable
  • Measurements on Fe & NFe substrates
  • Large measurement range of up to 200 mils
  • The QNix® 7500 complies to national and international (DIN, ISO, BS, ASTM) standards and regulations: DIN 50981, 50984 ISO 2178, 2360, 2808 BS 5411 (3 & 11), 3900-C5 ASTM B499, D 7091

Scope of delivery of the QNix® 7500

  • QNix® 7500 Gauge Body
  • Measuring probe (optional)
  • Adapter cable for external probe (optional)
  • Test certificate for optional measuring probe
  • Fe & NFe reference plates
  • 9 V block battery (alkaline)
  • Extension Cable
  • Operating instructions
  • Robust plastic case for transport and storage
$1,000.00
Availability: In stock
SKU
T1453015

The modularly built QNix® 7500 Paint Thickness gauge (DFT) offers mobility, simplest operation, highest accuracy to non -destructively measurement of coating thickness- mil thickness on both ferrous and non-ferrous substrates (steel and aluminum). It can measure up to 200 mils and unusual application variety. As a really small and handy gauge, QNix® 7500 can be used either with a directly inserted miniature measuring probe or with a measuring probe alongside an adaptor cable for non-destructive measurements of coating thickness on almost all metal substrates - Ferrous and Non-ferrous substrates. Simply place the probe head on the coated surface and read. Use coating Thickness measuring standards to check the accuracy of the QNix 7500 Dual probe

With a simple exchange of the probe, QNix® 7500 Dry Film Gauge can be optimally adapted to suit the measuring task. The dual 200 mil probe allows measuring coating thickness in many applications on ferrous and nonferrous metals. For these tasks, there is a comprehensive probe program available. The QNix 7500 modular system Paint Meter has proven itself in the coating industry, as the pioneer and one of the most reliable non-destructive coating thickness measurement devicesProbe change occurs via simple pull out and insert. You can immediately start using the gauge again.

This Thickness gauge combination uses two measuring principles: The Magnetic flux also known as Hall effect principle and the Eddy current principle. It conforms with DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900 - C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091

More Information
Country of ManufactureGermany
Write Your Own Review
You're reviewing:Qnix 7500 Basic int. w/ Dual probe 200 mils Paint Thickness Gauge | Paint Meter | Dry Film Gauge
Your Rating