Automatic puff off Adhesion Tester

Automatic Pull-Off Adhesion Tester - 20mm Kit Conforms with ASTM D4541

Leeb 462 Portable Surface Roughness Tester, Standard Drive, 4mN Detector, 20 mm Range

Leeb 462 Portable Surface Roughness Tester, Standard Drive, 4mN Detector, 20 mm Range

Automatic Multifunction Coating Performance Tester BEVS 2205

BEVS 2205 Automatic Multifunction Coating Performance Tester -Cross hatch cutter, scratch resistance, Rotary Abraser, Pencil hardness)

Automatic Pull-Off Adhesion Tester - 20mm Kit Conforms with ASTM D4541

BEVS 2201 Touch screen Automatic Pull-Off Tester determines the adhesion of single or multi-coat systems of paints, varnishes and other related products. Its high sensitivity ensures a smooth and continuous application of pressure to accurately measure the strength of the bond between coating and substrate. Real-time measure the temperature and humility of product surface, BEVS 2201 can be used on thin metals, wood, concrete and other coatings on Tanks and pipelines. Note: Used the optional BEVS 2201ATV Adhesion Tester Verifier to calibrate the BEVS 2201. Other National and International standards include: GB/T 5201-2006, ISO 4624:2002, ASTM D7234, ISO 4624, ISO 16276-1.

Technical specifications:

  • Power supply: Built-in rechargeable battery
  • Power adapter: DC 12.6 V
  • Power: 30 W
  • Loading up to 100Mpa
  • Accuracy of put off rate: 2.5%+0.3s
  • Data reproducible measurement enables to set the max. pull off force
  • Enable to set the holding time of tension
  • Data storage and quick view result
  • Real-time display the diagram of drawing rate USB data transmission
  • Multiple dollies are available
  • Data Output via Bluetooth function
  • Pull rate graphs Main Interface:
  • Real-time display curve and parameter.
  • Dolly size/diameter: 10mm, 14mm, 20mm, 50mm
  • Pull rate resolution: 0.5 seconds 1 MPa (145.04 psi)
  • Pressure resolution: 0.01 MPa (1 psi)
  • Pressure accuracy: 0.5 MPa (145.04 psi) or 1% range
  • User definable measuring/ hold force Range:
  • 10mm dolly: 10Mpa – 100MPa/s (1450psi – 14504psi)
  • 14mm dolly: 5Mpa – 50Mpa/s (725psi – 7252psi)
  • 20mm dolly: 2.5MPa – 25MPa/s (362psi – 3626psi)
  • 50mm dolly: 0.4MPa – 4MPa/s (58psi – 580psi)
  • Range of pull-off rate:
  • 10 mm dolly: 0.4-5.6MPa/s, (58-812psi/s)
  • 14 mm dolly: 0.2-2.8MPa/s, (29-403psi/s)
  • 20 mm dolly: 0.1-1.4MPa/s, (15-203psi/s)
  • 50 mm dolly: 0.02-0.22MPa/s, (2-32psi/s)
  • Unit: MPa, psi
  • Dust & water resistant rugged design to exceed IP64
  • Pull rate: adjustable and depend on dolly diameter
  • Dimension (L×W×H): 210×90×140mm
  • Net Weight: 3 kg.

 

Comes with: Packing list Standard: 20 *20 dolly, 3 Glue mixing tube, 1 2:1Glue gun, 1 Glue, 5 swab, 5 spile, 5 sandpaper, 1 20mm cutter / Optional: 10 50mm dolly, 3 Glue mixing tube, 1 2:1 Glue gun, 1 Glue, 5 swab, 5 spile, 5 sandpaper, 1 50mm cutter.

Download User Manual for BEVS 2201

$4,100.00
Availability: In stock
SKU
T16000051
The standard Test method for Pull-Off Strength of coatings using a portable Adhesion Tester is covered in ASTM D4541-17. This portable Adhesion Tester is used to evaluate the bond of pull-off strength / adhesion of coating system from metal substrates. The test of adhesion detects potential coating failures, hence reduce risk of poor adhesion and additional costs of rework during coating processes. The test is performed be securing a dolly with glue to the surface of coating to be tested. The tester is attached to the dolly and aligned to tension to test the surface. Gradually, force is applied and increased to the dolly and monitored as to when a certain load value is obtained or dolly detaches from coating surface.
More Information
Country of Manufacture China
Write Your Own Review
You're reviewing:Automatic Pull-Off Adhesion Tester - 20mm Kit Conforms with ASTM D4541
Your Rating